Start up Hardware Installation | Freecom Technologies Flash MP3

CHAPTER 1: Start up - Hardware Installation

1.1 Inserting battery & connecting headphone

1.Unlock battery cover by sliding the battery hold switch in the direction shown.

2.Slide the battery cover in the direction shown to open the battery cover.

3.Insert one AAA-size battery as shown, with the – side touching the spring inside the battery cover.

Note: Batteries contain chemical substances. When empty, they should be properly disposed of.

4.Slide the battery cover back.

5.Lock the battery cover by sliding the lock-switch back.

6.Insert the headphone jack into the headphone connector, as shown.