Freecom Technologies RCS-M1000U, RCS-M1000T manual Specifications, Before Using

SPECIFICATIONS

Model	Power/Electrical	Cooling Capacity	Input	EER
	Requirements
RCS-M1000T	110/115 volt, 60Hz	4000 BTU/h (1170W)	410W	9.76
RCS-M1000U	220/240 volt, 50Hz	3500 BTU/h (1030W)	310W	N/A

BEFORE USING

IMPORTANT: Remove unit from packaging and discard clear, plastic wrapping. Place unit in its upright position for a minimum of two hours before operating for the first time.

1.Place unit on a solid, level surface. Operating this unit on uneven or soft surfaces may cause vibration, noise, and possible water leakage from the condensate tank.

2.Place unit at least 20" from any walls, draperies, or other obstructions. Carefully push the unit on its caster wheels to desired location.

CAUTION: Do not operate unit without condensate water tank and air filters properly in place.

3.Check that condensate water tank is properly installed. When properly installed, the door of the condensate water tank will be flush with the exterior of the unit.

4.Check that both air filters are clean and properly installed.

8