Freescale Semiconductor i.MX27 PDK 1.0

About the Boards

Debug Board

10 i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0

Table 1.3 Debug Board SW4 Switch

Switch Setting Effect

SW4-1 UART Port Select ON Selects serial port UART (DCE) CON4

SW4-8 Power Enable ON Power is supplied to all three boards.

OFF Power is only supplied to the D ebug

board.

Table 1.4 Boot Mode Setting (SW5–SW10)

Boot Mode

Device

SW5 Boot4

SW6

Boot3

SW7

SW8 SW9 SW10

UART/USB

bootloader

X0 0 00 0

8-bit NAND Flash

(2KB page) Ext

X0 0 01 0

3StackQS_WinCE.book Page 10 Fri day, November 21, 2008 11:46 AM

Contents

Main Page 1 About the Boards 3 2 Getting Started 13 3 Build the Platfor m 17 4 Using the Demo Image 25 Page About the Boards About the 3-Stack Platform System Page About the 3-Stack Platform System 5 i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0 Table 1.1 3-Stack Platform Features Details Page CPU Board CPU Board Debug Board 8i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0 Debug Board Figure 1.2 Debug Board Debug Board TOP Bottom Page Page Personality Board 11 i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0 Personality Board TOP Bottom Figure 1.3 Personality Board Personality Board Personality Board 12 i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0 Table 1.5 Personality Board Physical Features Type Physical Feature Getting Started Unpack the Kit Page CD-ROM Contents 15 i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0 CD-ROM Contents Table 2.2.identifies the items on t he CD-ROM set. Table 2.2 Development PC Requirements Type Requirement Provide a Development PC Build the Platform Build a Development Platform: Assemble Three Boards Connect Personality Board to Debug Board Connect CPU Board to Debug Board Connect Development Platform to PC; Run Preloaded Image Build a Demo Platform: Assemble Two Boards Connect CPU Board to Personality Board Page Connect Power Supply; Run Preloaded Demo Page Using the Demo Image Touch Pad Calibration Tool Page Downloading Multimedia to the 3-Stack Board Using Active Sync Page Page Page Page Using an SD Card Using a USB Memory Stick Running the Demo Applications Running the TV-Out Application Page Page Page Page Page Page Page Page Ready to Begin Your Development?