SHARK BUZZ 2.0
S4S1
S3 | S2 |
S1. Start/stop button
S2. Lap/reset button
S3. Mode button
S4. Light button
DISPLAY MODES:
The watch has six display modes:
HOME TIME, STOPWATCH, FOREIGN TIME (T2), HOME TIME ALARM (A1), FOREIGN TIME ALARM (A2) and TIMER (TR).
To change from one display mode to another, press S3 button once.
TO USE THE VIBRATION AND BEEP FUNCTIONS:
The vibration and beep functions can be activated individually or simultane- ously. When the corresponding function is activated, the watch will vibrate and or beep when S1, S2 or S3 button is pressed or when an alarm goes off.
TO TURN ON/OFF THE VIBRATION AND BEEP FUNCTIONS:
In HOME TIME mode,
1. Press S1 button once to activate the vibration function. Vibration indica-
tor | will appear. |
2.Press again to activate the beep
function. Beep indicator 
will appear.
3.Press the third time to activate both functions. Both of the indicators will appear.
4.Press the fourth time to deactivate both functions. Both of the indica- tors will disappear.
TO SET THE TIME AND CALENDAR:
1.Press S3 button to select HOME TIME / FOREIGN TIME mode.
2.Press and hold S2 button for around 2 seconds, the second digits will blink.
3.Press S1 button to reset the second digits to zero.
4.Press S3 button, the hour digits will blink.
5.Press S1 button to set the hour digits. Holding down the button will speed up the process.
6.Press S3 button once, the minute digits will blink.
7.Press S1 button to set the minute digits. Holding down the button will speed up the process.
8.Follow the same pattern to set the hour format, date, month and day (of the week).
9.To set the hour format, press S1 button to toggle between
10.After finished making all the set- tings, press S2 button to confirm.
NOTE: In FOREIGN TIME settings, only the hour digits are open to setting.
All other settings are synchronized between HOME TIME and FOREIGN TIME mode.
HOME AND FOREIGN TIME DISPLAY: To display the foreign time, press S3 button to select FOREIGN TIME mode. The mode description (T2) will be displayed.
TO USE THE STOPWATCH:
1.Press S3 button to select STOP- WATCH mode.
2.The stopwatch will then be displayed in its current status – reset, running or stopped.
3.To resume a counting, press S1 button to resume from where it left off.
4.To start a new counting, reset the stopwatch to zero first.
Press S1 button to stop counting, then press S2 button to reset.
For the measurement of elapsed time In STOPWATCH mode,
1.Press S1 button to start counting.
2.To stop counting, press S1 button. Press S1 button again to resume from where it left off.
3.To reset to zero, press S1 button to stop counting and then press S2 button.
For the measurement of split time In STOPWATCH mode,
1.Press S1 button to start counting.
2.While the stopwatch is running, press S2 button to register a lap. The split time will be displayed and the stopwatch is still running in the background.
3.To display the currently accumu- lated time, press S2 button again.
4.Repeat the last step until all the laps have been registered.
5.To stop counting, press S1 button. Press S1 button to resume from where it left off.
6.To reset to zero, press S1 button to stop counting and then press S2 button.
NOTE: The stopwatch can count up to a maximum of 23 hours, 59 minutes and 59.99 seconds.
NOTE: You can leave the stopwatch running while switching over to other operating modes.
TO SET THE ALARM:
1.Press S3 button to select HOME ALARM or FOREIGN TIME to set.
2.Press and hold S2 button for around 2 seconds. The hour digits will blink.
3.Press S1 button to set the hour digits. Holding down the button will speed up the process.
4.Press S3 button, the minute digits will blink.
5.Press S1 button to set the minute digits. Holding down the button will speed up the process.
6.After finished making all the set- tings, press S2 button to confirm.
NOTE: The alarm will automatically be activated after being set.
NOTE: The alarm will work according to HOME TIME.
TO TURN ON/OFF THE ALARM AND HOURLY CHIME:
ENGLISH
1.Press S3 button to select HOME ALARM or FOREIGN ALARM to set.
2.Press S1 button to activate the
alarm. Alarm indicator 
/ 
will appear.
3.Press again to activate the hourly
chime. Chime indicator | will |
appear. |
|
4.Press the third time to activate both functions. Both of the indicators will appear.
5.Press fourth time to deactivate both functions. Both indicators will disappear.
WHEN AN ALARM OR CHIME GOES OFF: A tune will be emitted by the hour when the hourly chime function is activated.
An alarm tune will be emitted at the designated time for around 20 seconds when the alarm is activated. To stop the tune, press any button.
NOTE: The watch will not vibrate and or beep to signal an hourly chime and alarm unless the an vibration and or beep function is activated.
TO SET THE TIMER:
1.Press S3 button to select TIMER mode.
2.Press and hold S2 button for around 2 seconds, the hour digits will blink.
3.Press S1 button to set the hour digits. Holding down the button will speed up the process.
4.Press S3 button, the minute digits will blink.
5.Press S1 button to set the minute digits. Holding down the button will speed up the process.
6.After finished making all the set- tings, press S2 button to confirm.
TO USE THE TIMER:
1.Press S3 button to select TIMER mode.
2.The timer will be displayed in its current state – reset, running, or stopped.
3.To resume a counting, press S1 button to resume from where it left off.
4.To start a new counting,
Press S1 button to stop counting, then set the timer according to the paragraph “TO SET THE TIMER”.
5.Press S1 button to start counting.
6.To stop counting, press S1 button. Press S1 button again to resume from where it left off.
7.After reaching zero in a countdown, a tune will be emitted for around 20 seconds. To stop the tune, press any button.
NOTE: You can leave the timer running while switching over to other operating modes.
TO USE THE BACKLIGHT:
Press S4 button to turn on the back- light for around 3 seconds.
