
Setting
the Clock
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
Switch the system on |
| Press TIMER/CLOCK | |
by pressing POWER |
| ||
| twice. | ||
1button. | 2 | ||
|
• "CLOCK" is displayed.
3 Press ENTER. The hour flashes.
•Increase the hours :
•Decrease the hours :
When the correct
4 hour is displayed, press ENTER. The minutes flash.
•Increase the minutes :
•Decrease the minutes :
5 |
| When the correct |
| time is displayed, | |
| press ENTER. | |
|
|
|
•"TIMER" appears in the display.
•The current time is now set.
Note
•You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.
•You can also use on the main set instead of
buttons in step 3,4.
Checking the Remaining Time Press the REMAIN button.
•For checking the remaining time of a title or chapter being played.
Each time the REMAIN button is pressed , the time is displayed as below:
DVD | TITLE REMAIN TIME |
|
CHAPTER REMAIN TIME
ELAPSED TIME
23
CD MP3
Press the REMAIN button.
If you press the REMAIN button, the remaining time is displayed.
To cancel this function, press the REMAIN button again.