Manually Assigning a Static IP Address
Members using static IP on their home network may wish to configure the adaptor with static IP. If you have obtained a static IP from your Internet service provider (ISP) and wish to configure your adaptor with your static IP settings, please follow the instructions below:
1.You will first have to obtain the following information:
•IP Address • Default Gateway • Subnet Mask
If you are using a router, please contact your router manufacturer for instructions for retrieving this information from the router directly. If you are not using a router, please obtain the above information from your ISP.
2.Pick up the phone connected to Phone 1 and dial ****. You will hear a voice prompt saying "Sipura configuration menu: please enter option followed by the pound key, or hangup to exit".
3.Dial 101# to access the Static IP configuration menu.
4.Dial 0# to disable DHCP, then dial 1 to save the setting.
5.Dial 111# to access the IP Address Menu. Enter the
6.Dial 121# to access the Subnet Mask Menu. Enter the
7.Dial 131# to access the Default Gateway IP Address Menu. Enter the Internet Gateway's IP Address followed by # (using * to represent “.” eg.
123*45*67*1# to represent the IP address 123.45.67.1). Dial 1 to save the setting.
8.Dial 161# to access the DNS Server IP Address Menu. Enter the Primary DNS Server's IP Address followed by # (using * to represent “.” eg.
123*45*67*1# to represent the IP address 123.45.67.1). Dial 1 to save the setting.
9.Hang up the phone.
You have now completed the static IP configuration.
To verify the configuration was correct, pick up the phone connected to Phone 1 and dial ****. You will hear a voice prompt saying "Sipura configuration menu: please enter option followed by the pound key, or hangup to exit".
