Freshtel manual Next, we must verify that the SPA-2000 has a valid IP Address

Next, we must verify that the SPA-2000 has a valid IP Address:

1.Pick up the phone connected to Phone 1 of the SPA-2000 and dial ****. You will hear a voice prompt saying "Sipura configuration menu: please enter option followed by the pound key, or hangup to exit".

2.Dial 110#. The system will now read back the IP address of your SPA-2000. Please write it down.

If the IP is 0.0.0.0, your SPA-2000 does not have a valid IP address. In this case you need to:

1.Hang up the phone, unplug and re-plug your SPA-2000 power cord.

2.Wait 2 minutes, and check the IP again.

3.If you still get 0.0.0.0, there can be two reasons for this:

a.Your DHCP Server is not assigning an IP address to the SPA-2000 (in which case you should contact your network administrator or ISP for assistance).

b.Your network does not have a DHCP server or you have purchased a Static IP Address for the SPA-2000 from your ISP. In this case, please proceed to Manually Assigning a Static IP Address below, otherwise skip this step.