|
|
| English |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Setting 0 | Good for metals, plastics, and best quality finish in wood and wood products |
| ||
|
| such as plywood, chip board, etc. Also good for scroll work. |
| ||
|
|
|
| ||
| Setting 1 | Better quality cut in wood and wood products where speed of cut is more |
| ||
|
| imortant than quality of cut. |
| ||
|
|
|
| ||
| Setting 2 | Good quality with faster cut speed in wood and wood products. |
| ||
|
|
|
| ||
| Setting 3 | Fastest speed with coarse cuts in wood and wood products where speed is |
| ||
|
| more important than quality of cut. |
| ||
|
|
|
|
|
|
7. Base Plate Angle Adjustment
The base plate may be tilted to produce angle cuts up to 45º - Fig. 10.
To adjust the base plate, unplug the tool then loosen the screw on the bottom of the saw with the included allen key – Fig. 11.
Position the base as far forward as possible to provide for maximum blade inclination – Fig. 12.
Position the base at the desired cutting angle and tighten the screw in the bottom of the saw – Fig. 13 & 14.
Note: The base should be placed as far forward as possible to allow for unlimited saw blade inclination.
Fig. 11
Fig. 10
Fig. 12
13
