ADDITIONAL ACCESSORIES
MODEL NUMBER | DESCRIPTION | PHOTO |
| SLEEVE EXTENSION RETROFIT KIT Galvanized zinc coated |
|
PXSE | steel, 2.4" sleeve extension attached to the room side of the |
|
sleeve to allow for the installation of a |
| |
|
| |
| PTAC in a |
|
| LATERAL DUCT ADAPTER Attaches to the PTAC/PTHP |
|
PDXDA | unit and provides a transition to direct up to 35% of the total |
|
CFM to a secondary room, either left or right of the unit. Kit |
| |
| includes duct plenum with discharge grille and internal baffle, |
|
| adapter and end cap. |
|
| LATERAL DUCT EXTENSION A |
|
PDXDE | plenum that attaches to the left or right side of the duct |
|
adapter. The extension can be cut to length by the installer. |
| |
|
| |
| Maximum allowable straight extension is 15 feet. |
|
| CONDUIT KIT WITH JUNCTION BOX Hard wire conduit kit |
|
PXCJ | with junction box for 208/230V and 265V units (subbase not |
|
required). Kit includes a means of quick disconnect for easy |
| |
|
| |
| removal of the chassis. *Required for 265V installations. |
|
PXPC | POWER CORD RETROFIT Replaces LCDI power cord on |
|
230V models when unit is used with a subbase. PXPC15 is |
| |
15/20/30 | used with 15 amp 2.5 kW units. PXPC20 is used with 20 amp |
|
| 3.4 kW units. PXPC30 is used with 30 amp 5.0 kW units. |
|
|
| PXPC30 |
CHASSIS OPTIONS |
|
|
DESIGNATOR | DESCRIPTION |
|
SSTANDARD UNIT Standard PTAC/PTHP chassis. Can be 230/208V or 265V, electric or heat pump.
SEACOAST PROTECTION Additional protection for PTAC/PTHP units in a coastal or corrosive environment.
CThe entire outdoor coil is submerged in a specially formulated enamel coating, then
26