Friedrich MW18Y3FM, MW09Y3FM, MW12Y3FM manual Adjusting The Direction Of Air Circulation, En-9

Models: MW09Y3FM, MW12Y3FM, MW18Y3FM, MR24DY3F, MR36TQY3F MW12Y3FM MW09Y3FM MW18Y3FM

1 19
Download 19 pages 40.02 Kb
Page 12
Image 12
ADJUSTING THE DIRECTION OF AIR CIRCULATION

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Vertical (up-down) direction of airflow is adjusted by pressing the Remote Control Unit’s SET button. Horizontal (right-left) airflow direction is adjusted manually, by moving the Air Flow Direction Louvers.

Whenever making horizontal airflow adjustments, start air conditioner operation and be sure that the vertical air direction louvers are stopped.

Vertical Air Direction Adjustment

Press the SET button (Fig. 5 O).

Each time the button is pressed, the air direction range will change as follows:

RDANGER!

Never place fingers or foreign objects in- side the outlet ports, since the internal fan operates at high speed and could cause personal injury.

1 En-9Manual background 2 Manual backgroundManual background 3 Manual backgroundManual background 4 Manual backgroundManual background 5 Manual backgroundManual background 6 Manual backgroundManual background 7

Types of Air flow Direction Setting:

1,2,3 : During Cooling/Dry modes

4,5,6,7 : During Heating mode

The Remote Control Unit’s display does

 

not change.

1

 

2

 

3

4

5

6

7

Use the air direction adjustments within the ranges shown above.

The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.

During Cooling/Dry mode : Horizontal flow 1

During Heating mode

: Downward flow 7

During AUTO mode operation, for the first minute after beginning operation, airflow will be horizontal 1; the air direction cannot be adjusted during this pe- riod.

Always use the Remote Control Unit’s SET button to adjust the vertical airflow louvers. Attempting to move them manually could result in improper op- eration; in this case, stop operation and restart. The louvers should begin to operate properly again.

During use of the Cooling and Dry modes, do not set the Air Flow Direc- tion Louvers in the Heating range (4 - 7) for long periods of time, since wa- ter vapor may condense near the out- let louvers and drops of water may drip from the air conditioner. During the Cooling and Dry modes, if the Air Flow Direction Louvers are left in the heat- ing range for more than 30 minutes, they will automatically return to posi- tion 3.

When used in a room with infants, chil- dren, elderly or sick persons, the air direction and room temperature should be considered carefully when making settings.

Right-Left Adjustment

Adjust the Right-Left louvers.

Move the Right-Left louvers to adjust air flow in the direction you prefer.

Right-Left Louvers

RDANGER!

When adjusting the Right-Left Louvers, it is necessary to stop the Air-Conditioner first and make sure that it stops completely before adjusting the direction.

knob

knob(three places)

En-9

Page 12
Image 12
Friedrich MW18Y3FM, MW09Y3FM, MW12Y3FM manual Adjusting The Direction Of Air Circulation, En-9