Frigidaire 134849000A manual Opening and Closing the Dispenser Drawer, Liquid Bleach, Detergent

Models: 134849000A

1 11
Download 11 pages 9.13 Kb
Page 5
Image 5

5. Add detergent, bleach and fabric softener to automatic dispenser following these steps:

A.OPENING AND CLOSING THE DISPENSER DRAWER

Slowly open the dispenser drawer by first sliding the safety latch to the right, then pulling the drawer out until it stops.

After adding laundry products, slowly close the dispenser drawer. Closing the drawer too quickly could result in early dispensing of bleach or fabric softener.

Note: From time to time you may see water in the bleach and fabric softener compartments. This is a result of the siphoning action and is part of the normal operation of the washer.

C.LIQUID BLEACH

If desired, measure out the recommended amount of liquid chlorine bleach (not to exceed 1/3 cup (80 mL)) and pour it into the center compartment labeled

"Liquid Bleach" and marked with this symbol

.

Fill to the mininum fill line (MIN.)for small loads. Fill to the maximum fill line (MAX.) for large loads. Do not exceed the maximum fill line. Overfilling can cause early dispensing of the bleach which could result in damaged clothes.

Do not pour undiluted liquid chlorine bleach directly onto the load or into the drum. Fabric damage can occur.

Add powder or liquid color-safe bleach to the detergent dispenser.

B.DETERGENT

Detergent is flushed from the dispenser at the beginning of the cycle. Either powdered or liquid detergent can be used. Note: Liquid detergent will drain into the washer drum as it is added.

Add a low-sudsing, high-efficiency detergent made for front-loading washers to the dispenser chamber. Look

for this symbol

on the detergent label.

Use the cap or scoop provided bythe detergent manufacturer to measure the amount recommended.

Color-safe bleach, water conditioner, detergent booster and enzyme products may be added to the detergent compartment. Avoid mixing liquids and powders.

Detergent usage may need to be adjusted for water temperature, water hardness, load size and soil level.

• For best results, avoid oversudsing.

5

 

D.FABRIC SOFTENER

If desired, pour the recommended amount of fabric

softener into the compartment labeled "Fabric

Softener" and marked with this symbol .

Fill to the mininum fill line (MIN.) for small loads. Fill to the maximum fill line (MAX.) for large loads. Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could result in stained clothes.

Do not pour fabric softener directly on the wash load.

Use of a fabric softener dispensing ball is not recommended in tumble action washers.

Page 5
Image 5
Frigidaire 134849000A manual Opening and Closing the Dispenser Drawer, Liquid Bleach, Detergent, Fabric Softener

134849000A specifications

The Frigidaire 134849000A is a replacement part designed specifically for a variety of refrigerator models, contributing to efficient cooling performance and enhancing the overall functionality of your home appliance. This item serves as a key component in the evaporator system, which is crucial for optimal temperature regulation within the refrigerator.

One of the primary features of the Frigidaire 134849000A is its robust construction. Made from high-quality materials, this replacement part is built to withstand the rigors of daily use and is resistant to wear and tear, ensuring a longer lifespan compared to lower-quality alternatives. The design of the evaporator also ensures that it fits seamlessly into compatible models, making installation straightforward and hassle-free for homeowners and technicians alike.

The technology behind the Frigidaire 134849000A revolves around enhancing refrigeration efficiency. The evaporator is designed to effectively absorb heat from the inside of the refrigerator, allowing the cooling system to maintain a consistent and optimal temperature range for food preservation. By efficiently removing excess heat, this part contributes to energy savings, ultimately lowering utility bills while maintaining the freshness of stored food items.

In terms of characteristics, the Frigidaire 134849000A is known for its reliable performance. This part has been rigorously tested to ensure that it meets industry standards, providing durability and stability that users can count on. Additionally, the evaporator is designed to minimize vibrations and noise, offering a quieter operation than many other units on the market.

Another notable characteristic of this part is its compatibility with a wide range of Frigidaire refrigerator models. Homeowners are often faced with the challenge of finding the right replacement parts for older units, but the 134849000A is versatile enough to work with many variations, simplifying the repair process.

In conclusion, the Frigidaire 134849000A is an essential replacement part that embodies quality, efficiency, and reliability. Its advanced technology, robust construction, and compatibility with numerous refrigerator models make it an ideal choice for anyone looking to restore their refrigerator's optimal performance and extend its lifespan. Whether for routine maintenance or necessary repairs, this part is a valuable addition to any Frigidaire appliance, ensuring continued satisfaction in food preservation.