FUNCTION TEST SEQUENCE
1.Press and hold Select and Cancel buttons simultaneously for 6 seconds to reset the control. The buzzer will sound.
2.Immediately after, rotate cycle selector knob 5 turns
After entering the test mode, the cycle selector knob can now be rotated to select the following tests:
Rotate the cycle selector knob clockwise from the starting position:
0 turns: | All LED’s will flash. |
1 turn: | Drive motor runs; heat source is on. Drying LED is lit. “H” and the control thermistor reading will toggle |
| back and forth in the display. |
2 turns: | Drive motor runs; heat source is off. Cool Down LED is lit and “AF” (Air Fluff) is displayed. |
3 turns: | Drive motor runs; heat source is off. Drying and Cool Down LED’s are lit and numbers appear in the |
| display showing moisture sensor readings. Opening the door (press in on door switch plunger) and placing |
| a finger on the both moisture sense bars at the same time will make the numbers decrease. In controls that |
| do not have a digit display, the More Dry LED should be ON. Opening the door (press in on door switch |
| plunger) and placing a finger on the both moisture sense bars at the same time will make the Damp LED |
| come on. |
4 turns: | Drive motor runs; heat source is off. |
| Key test: |
| a. When the Temperature key is pressed, all the temperature LED’s should light. |
| b. When the Dryness key is pressed, all the dryness level LED’s should light. |
| c. When the Options or Select key is pressed, all the Option LED’s should light. |
| d. When the Start/Pause key is pressed, all the cycle status LED’s should light. |
| e. When the Cancel key is pressed, all the cycle status LED’s should light. |
5 turns: | Drive motor runs; heat source is off. Cool Down LED is lit. Control thermistor reading is displayed. |
6 turns: | Drive motor runs; heat source is on. Drying LED is lit. Control thermistor reading is displayed. |
All LED’s will flash |
To EXIT test mode, press and hold the Select and Cancel buttons simultaneously for 6 seconds or disconnect power from dryer. Dryer will be reset for regular operation.
