To tune in a preset station
On the front panel:
FM/AM
1. Press FM/AM to select the band.
The cursor control %/ Þ / @/ #buttons can be now used for operating the tuner.
•Each time you press the button, the band alternates between FM and AM.
VOLUME
100 1k 10k
2. Press cursor control % / Þ repeatedly until “ – PRESET +” appears on the display.
VOLUME
100 1k 10k
3. Press cursor control @/ #to select a preset channel station.
• Pressing @decreases the preset channel number.
•Pressing #increases the preset channel number.
From the remote control:
1.Press FM/AM.
•Each time you press the button, the band alternates between FM and AM.
VOLUME
100 1k 10k
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy
You can change the FM reception mode while receiving an FM broadcast.
On the front panel ONLY:
FM/AM
1. Press FM/AM to select the band.
The cursor control %/ Þ / @ / # buttons can be now used for operating the tuner.
•Each time you press the button, the band alternates between FM and AM.
2. Press cursor control %/ Þ repeatedly until “FM MODE” appears on the display.
VOLUME
100 1k 10k
3. Press cursor control @/ #to switch the FM reception “AUTO” or “MONO.”
VOLUME
MUTE AUTO
100 1k 10k
VOLUME
100 1k 10k
2.Press 10 keys to select a preset channel number.
•For channel number 5, press 5.
•For channel number 15, press +10 then 5.
•For channel number 20, press +10 then 10.
•For channel number 30, press +10, +10, then 10.
Note:
DELAY TEST SURROUND
1 2 3
EFFECT | – CENTER + | |
4 | 5 | 6 |
MENU |
| – REAR•L + |
7/P | 8 | 9 |
100+ | – REAR•R + RETURN | |
+10 | 0 | 10 |
|
| ENTER |
AUTO: When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The MUTE AUTO indicator lights up on the display.
MONO: Reception will be improved although you will lose the stereo effect. In this mode, you will hear noise while tuning into the stations. The MUTE AUTO indicator
When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 32.)
goes off on the display.
14
