Care and Cleaning Tips, Part, Cleaning Agents

CARE & CLEANING

Care and Cleaning Tips

Interior

&Door Liners

Door

Gaskets

Drawers &

Bins

Glass

Shelves

Toe Grille

Exterior & Handles

Exterior & Handles (Stainless Steel Models Only)

Replacing Light Bulbs

Cleaning Agents		Tips and Precautions
•	Soap and water	•	Use two tablespoons of baking soda in one quart
•	Baking soda and		of warm water.
	water	•	Be sure to wring excess water out of sponge or
			cloth before cleaning around controls, light bulb or
			any electrical part.

•Soap and water • Wipe gaskets with a clean soft cloth.

•Soap and water • Use a soft cloth to clean drawer runners and tracks.

•Do not wash any removable items (bins, drawers, etc.) in dishwasher.

•Soap and water • Allow glass to warm to room temperature before

• Glass cleaner

immersing in warm water.

•Mild liquid sprays

•Soap and water • Remove toe grille (see Installation Instructions).

•	Mild liquid sprays	• Vacuum both sides and wipe with sudsy cloth or
•	Vacuum	sponge. Rinse and dry.

•Soap and water • Do not use commercial household cleaners

• Non abrasive	containing ammonia, bleach or alcohol to clean
glass cleaner	handles.

•Use a soft cloth to clean smooth handles.

•Do not use a dry cloth to clean smooth doors.

•Soap and water • Never use CHLORIDE or cleaners with bleach to

• Stainless steel		clean stainless steel.
cleaners	•	Clean stainless steel front and handles with non-
		abrasive soapy water and a dishcloth. Rinse with
		clean water and a soft cloth.
	•	Use a non-abrasive stainless steel cleaner.
		These cleaners can be purchased at most home
		improvement or major department stores. Always
		follow manufacturer’s instruction. Do not use
		household cleaners containing ammonia or bleach.
		NOTE: Always clean, wipe and dry with grain to
		prevent scratching.
	•	Wash the rest of the cabinet with warm water and
		mild liquid detergent. Rinse well and wipe dry with
		a clean soft cloth.

•	Unplug	CAUTION: Wear gloves when replacing light
	refrigerator	bulbs to avoid getting cut.
•	Wear gloves	Use same wattage when replacing bulb.

•Remove light cover

•Replace old bulb

•Replace light cover

•Plug in the refrigerator