Frigidaire FGHS2355PF, 242288200 Door Removal Instructions, To remove the freezer top hinge cover

DOOR REMOVAL INSTRUCTIONS

3Remove the two bottom hinge screws and hinge if necessary.

Door

Hinge

Assembly

Closer

Pin

ScrewsHinge

Adjustable Hinge (some models)

To reinstall the refrigerator door, reverse the above steps.

To remove the freezer top hinge cover:

1Remove the two screws from each cover over the top door hinges.

2Lift hinge cover straight up and off.

Front	Rear
Cover Screws	Cover
Top Hinge	Screw
Cover
Hinge
Screws
Multi-Wire
Cable
	Top
	Hinge

To remove the freezer door:

1Detach the multi-wire cable connector located above the top hinge. Grasp both sides of the connector firmly and pull apart.

2Trace lightly around the hinge with a pencil. This makes reinstallation easier.

3Detach the water tube from the connector located below the freezer door. The connector releases when you press its outer sleeve inward.

4Remove the screws from the top hinge and pull the multi-wire cable through it. Lift the door off of the bottom hinge.

5Remove the two bottom hinge screws and hinge if necessary.

To Disconnect

1. Press outer ring against face of fitting

2. Pull to

remove tube

To Connect

Insert tube and

push until mark touches face of fitting

		Door
Closer	Pin		Water
			Line
			Tubing
Hinge		Hinge	Screws
		Assembly

Adjustable Hinge (some models)

Door

Water

Line

Tubing

Hinge

Assembly Screws

Non-Adjusting Hinge (some models)

6Lay the door on its side to avoid damage to the water tube extending from the bottom hinge.

To reinstall the freezer door, reverse the above steps.

CAUTION

Be sure doors are set aside in a secure position where they cannot fall and cause personal injury.

8