Solutions to common problems • BEFORE YOU CALL

Problem

Solution

 

 

Soil not completely removed after self- cleaning cycle.

•Failure to clean bottom, front top of oven, frame of oven or door area outside oven seal. These areas are not in the self-cleaning area, but get hot enough to burn on residue. Clean these areas before the self-cleaning cycle is started. Burned-on residue can be cleaned with a stiff nylon brush and water or a nylon scrubber. Be careful not to damage the oven gasket.

Oven smokes excessively during broiling.

• Incorrect setting. Follow broiling instructions in Setting Oven Controls.

 

• Make sure oven door closed.

 

• Meat too close to upper burner. Reposition oven rack to provide proper

 

clearance between the meat & the burner. Preheat the oven.

 

• Meat not properly prepared. Remove excess fat from meat. Cut remaining

 

fatty edges to prevent curling, but do not cut into lean.

 

• Broiler pan and insert wrong side up and grease not draining. Always

 

place insert on the broiler pan with ribs up & slots down to allow grease

 

to drip into pan (some models).

 

• Grease has built up on oven surfaces. Regular cleaning is necessary when

 

broiling frequently. Old grease or food spatters cause excessive smoking.

 

 

Flames inside oven or smoking from

• Excessive spillovers in oven. For example this will happen for pie

oven vent.

spillovers or large amounts of grease left on the oven bottom. Wipe up

 

excessive spillovers before starting oven. If flames or excessive smoke

 

are present see “Broiling” in the Setting Oven Controls section.

Oven control panel beeps & displays any F code error (for example F10, F11, F13, F14, F15, F30, F31 or F90).

•Oven control has detected a fault or error condition. Press clear off to clear the display & stop beeping. Try the bake or broil feature again. If the F code error repeats, remove power from appliance, wait 5 minutes and then repower appliance and set clock for the time of day. Try the bake or broil feature again. If the fault recurs, record fault and call for service.

Oven light does not work.

•Be sure the light is secure in the socket. Also see “Replacing oven light” in the Care & Cleaning section.

Appliance is not level.

• Be sure floor is level, strong & stable enough to adequately support range.

 

• If floor is sagging or sloping, contact a carpenter to correct the situation.

 

• Poor installation. Place oven rack in center of oven. Place a level on the

 

oven rack. Adjust leveling legs at base of appliance until the rack is level.

 

• Kitchen cabinet alignment may make range appear not level. Be sure

 

cabinets are square & have sufficient room for appliance clearance.

Cannot move appliance easily. Appliance must be accessible for service.

•Cabinets not square or are built in too tightly. Contact builder or installer to make appliance accessible.

•Carpet interferes with appliance. Provide sufficient space so appliance can be lifted over carpet.

23

Page 22 Page 24
Page 23
Image 23
Frigidaire FFGF3023LW, 316901213, FFGF3027LB, FFGF3023LM, FFGF3021LW, FFGF3023LQ Solutions to common problems Before YOU Call
Page 22 Page 24

FFGF3053LS, FFGF3023LB, FFGF3027LW, FFGF3027LS, FFGF3023LQ specifications

The Frigidaire FFGF3027LS is a prominent model in Frigidaire’s line of gas ranges, offering a blend of reliability, versatility, and modern design. With a sleek stainless steel finish, it not only complements contemporary kitchens but also maintains its shine over time. This model, along with its counterparts like the 316901213, FFGF3023LW, FFGF3027LW, and FFGF3023LB, showcases a commitment to performance and user functionality.

One of the standout features of the FFGF3027LS is its 30-inch width, which makes it an ideal fit for most kitchens. It boasts a large oven capacity of 5.0 cubic feet, providing ample space to cook multiple dishes simultaneously. The range comes equipped with four gas burners, allowing for a variety of cooking techniques—from simmering sauces to boiling pasta effectively. The inclusion of a powerful burner enhances its versatility, making it easy to achieve high heat for frying or searing.

A key technology integrated into the FFGF3027LS is the Even Baking Technology. This ensures that heat circulation is optimized, leading to consistently baked goods, whether in the oven or on the stovetop. Additionally, this model features a convenient oven light, allowing users to monitor their cooking without opening the door and losing heat.

The easy-to-use controls offer precision and convenience, with a low-profile design that ensures cleanliness. The range is equipped with a self-cleaning option, which simplifies maintenance by allowing the oven to clean itself with minimal user intervention, saving both time and effort.

In terms of safety, Frigidaire has prioritized feature inclusion, such as the electronic ignition system that eliminates the need for a standing pilot light, reducing energy consumption. The unit is also designed with a durable porcelain cooktop, providing a resilient surface that is easy to clean and maintain.

The range variants like the 316901213, FFGF3023LW, FFGF3027LW, and FFGF3023LB share similar features but may differ in color options or minor specifications, providing consumers with choices suited to their kitchen aesthetics. Overall, the Frigidaire FFGF3027LS and its related models represent a well-rounded recipe for modern cooking that combines style, functionality, and innovation, making them an excellent choice for any home chef.
Top Page Image Contents