SETTING OVEN CONTROLS

To program oven for delay start time and to shut-off automatically

The delay start feature allows you to set a start and end time to the cooking process. Prior to setting a delay start, be sure the time of day is set correctly. If the delay start needs to be set more than 12 hours in advance (12-24 hours), the control must first be programmed for 24 hour display mode. See “Setting 12 or 24 hour display modes” section.

When the set bake time runs out:

1."END" will appear in the display window and the oven will shut-off automatically (See Fig. 2).

2.The control will beep 3 times every 30 seconds as a reminder until the cancel key pad is pressed.

WARNING

FOOD POISONING HAZARD. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness.

To program the oven for a delay start and to shut-off automatically (example for baking at 375°F for 50 minutes and starting at 5:30):

Step

Press

1. Press bake time.

2. Enter 50 mintues.

3. Press start.

4. Press delay start (See Fig. 1).

5. Enter 530.

6. Press and hold start.

7. Enter 375.

8. Press start.

Fig. 1

Fig. 2

NOTES

After the delay start feature has activated and started the cooking process, press the bake time pad to display the bake time remaining.

The delay start feature may be used with the convect or convect convert cooking features. Bake time will not operate when using the broil feature.

16

Page 16
Image 16
Frigidaire 316901300, CGGF3054KF important safety instructions Setting Oven Controls