Frigidaire 316902202 Adjusting the oven temperature, Restoring factory default settings

Models: 316902202

1 40
Download 40 pages 30.73 Kb
Page 26
Image 26
Adjusting the oven temperature

SETTING OVEN CONTROLS

Adjusting the oven temperature

Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you can adjust the control so the oven cooks hotter or cooler than the temperature displayed.

The oven temperature my be increased +35°F (+19°C) or decreased -35°F (-19°C) from the factory settings.

Example: increase the oven temperature by 30°F:

Step

Press

1.Press and hold bake for 6 seconds.

2.Enter 30.

3.Press start.

Example: decrease the oven temperature by 30°F:

Step

Press

1.Press and hold bake for 6 seconds.

2.Enter 30.

3.Press self-clean.

4.Press start.

Restoring factory default settings NOTES

Oven temperature adjustments made will not affect the broil or self-cleaning feature temperatures.

If the temperature shows an adjustment of -30°F, and a +30°F adjustment is needed, you can toggle between the (-) or (+) in the display by pressing self clean.

DO NOT USE oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40 degrees from actual temperatures.

Restoring factory default settings

When new, your appliance left the factory with predetermined oven control default settings. Over time, the user may make changes to these settings. The following options have user preferences that could be modified and may have been changed since the appliance was new:

12 or 24 hour display mode

Continuous bake or 6-Hour Energy Savings mode

Silent control panel

Oven temperature display (Fahrenheit or Celsius)

Adjusting the oven temperature

My favorite

Please remember that if you choose to restore, ALL of the above preferences will be restored to factory default settings, the oven temperature offset will reset and any stored information will be cleared.

To restore all user settings to factory default:

Step

Press

1.Press and hold 7 key pad until first beep sounds (about 6 seconds).

2.Press start.

Operating the oven light

The interior oven light will automatically turn ON when the oven door is opened.

Press

to turn the interior oven light ON and OFF

whenever the oven door is closed.

The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.

To change the interior oven light, see "Changing the oven light" in the Care & Cleaning section.

26

Page 26
Image 26
Frigidaire 316902202 Adjusting the oven temperature, Restoring factory default settings, Operating the oven light