WARMER DRAWER
(some models)
(continued)
Arranging Warmer Drawer Rack Positions
Set the warmer drawer rack in the vertical position as shown below.
The rack can be used in 2 ways:
•In the upright position to allow low profile food items to be placed both under and on top of the rack (for example, rolls or biscuits on top of the rack and a casserole dish under).
•In the downward position to allow you to place light weight food items and empty dishware (for example, rolls or pastries and dinner plates).
Upright Position |
Downward Position |
General Cleaning
Pull up on left glide latch while inserting a screwdriverover the right latch andpushing down.
Electrical Shock Hazard can occur and result in serious injury or death.
Disconnect appliance from electric power before cleaning and servicing the warmer drawer.
To Remove and Replace Warmer Drawer
To Remove Warmer Drawer:
1. Turn power off before removing the warmer drawer.
2.Open the drawer to the fully opened position.
3.Locate the latches on both sides of the warmer drawer. The left latch is visible. However, the right side is not and is located inside the drawer glides.
4.Pull up on the left glide latch while inserting a screwdriver over the right latch and pushing down.
5.Pull the drawer away from the range.
6.To clean warmer drawer, gently scoure with a soapy scouring pad, this will remove most spots. Rinse with a 1:1 solution of clear water and ammonia.
If necessary, cover difficult spots with an
cleaners or the porcelain may become damaged during future heating. | DO |
NOT use spray oven cleaners on the cooktop. |
|
To Replace Warmer Drawer:
1.Align the glide latches on both sides of the drawer with the slots on the drawer.
2.Push the drawer back into the range.
WARMER DRAWER
2