Before you call

 

Solutions to Common Problems

 

 

 

 

OCCURRENCE

 

POSSIBLE CAUSE/SOLUTION

Range is not level.

 

Poor installation. Place oven rack in center of oven. Place a level on the oven rack.

 

 

Adjust leveling legs at base of range until the rack is level. When range is level,

 

 

cooktop may appear out of alignment if countertop is not level.

 

 

 

 

 

 

Weak, unstable floor. Be sure floor is level and can adequately support range. If floor

 

 

is sagging or slopping, contact a carpenter to correct the situation.

 

 

 

 

 

 

Kitchen cabinet misalignment may make range appear to be unlevel. Be sure

 

 

cabinets are square and have sufficient room for range clearance.

 

 

 

 

Cannot move appliance easily. Appliance must be accessible for service.

Cabinets not square or are built in too tight. Contact a cabinet maker to correct the problem.

Contact builder or installer to make appliance accessible.

Carpet interferes with range. Provide sufficient space so range can be lifted over carpet.

Gas line is hard-plumbed. Have a flexible C.S.A international approved metal appliance connector installed.

Entire range or oven does not operate.

Make sure cord/plug is plugged tightly into outlet.

Service wiring is not complete. Call an authorized servicer.

Electrical power outage. Check house lights to be sure. Call your local electric company for service. Surface burners can be lit manually.

*Oven control beeps and displays any F code error (for example F11)

Electronic control has detected a fault condition. Press STOP/CLEAR to clear the display and stop beeping. Reprogram oven. If fault recurs, record fault number. Press STOP/CLEAR and call an authorized servicer for assistance.

Oven light does not work.

Replace or tighten bulb. See Changing Oven Light section in this Use & Care Guide.

Surface burners do not light.

Surface control knob has not been completely turned to LITE. Push in and turn the surface control knob to LITE until burner ignites and then turn the surface control knob to the desired flame size.

Burner ports are clogged. Clean burners. See “Cleaning the Burner Grates, Burner Caps and Burner Heads” under General Cleaning.

Range power is disconnected from outlet. Be sure cord is securely plugged into the outlet.

Electrical power outage.

Be sure the gas supply to the range is turned “ON”.

Surface burner flame burns half way around.

Burner ports or slots are clogged. With the burner off, use a small-gauge wire or needle to clean ports or slots.

Moisture is present after cleaning. Lightly fan the flame and allow the burner to operate until flame is full. Dry the burners thoroughly following instructions under General Cleaning.

20

Page 20
Image 20
Frigidaire 318203863 warranty Before you call, Range is not level, Entire range or oven does not operate

318203863 specifications

The Frigidaire 318203863 is a versatile and essential appliance component designed to enhance the efficiency and performance of various Frigidaire ranges and ovens. As a replacement oven burner, it plays a crucial role in delivering consistent heat for cooking a wide array of dishes. This component boasts several features and technologies that set it apart in the realm of kitchen appliances.

One of the most notable characteristics of the Frigidaire 318203863 is its compatibility. This oven burner is designed to fit a range of Frigidaire models, making it an ideal solution for homeowners looking to maintain or repair their cooking appliances. The ease of installation is another key feature; users can quickly replace their old burner without requiring professional assistance, saving both time and money.

The burner is constructed from durable materials that ensure longevity and resistance to wear and tear. This sturdy build is essential for any cooking appliance, as it must withstand high temperatures and frequent use. Additionally, the design of the burner ensures an even heat distribution, which is crucial for optimal cooking results. Even heat dispersion helps in achieving perfectly cooked dishes without burnt edges or undercooked centers.

In terms of technology, the Frigidaire 318203863 incorporates advancements that improve energy efficiency. This means that while it delivers high performance in terms of heat output, it also consumes less energy compared to older burner designs. This not only benefits the environment but also helps homeowners reduce their energy bills.

The versatility of the Frigidaire 318203863 allows users to prepare a wide range of meals, from simmering delicate sauces to searing steaks, all with consistent and reliable heat control. This adaptability is a fundamental aspect of modern cooking, catering to diverse culinary needs.

Lastly, the Frigidaire 318203863 exemplifies the brand’s dedication to quality and customer satisfaction. With a focus on performance, ease of use, and durability, it remains a popular choice among both amateur cooks and seasoned chefs. Embracing this replacement burner is a step towards maintaining a well-functioning kitchen capable of handling any culinary challenge.