Care & Cleaning

Removing and Replacing Storage Drawer with Extendible Glide (some models)

To Remove Storage Drawer:

1.Open the drawer to the fully opened position.

2.Locate glide lever on each side of drawer, pull up on the left glide lever and push down on the right glide lever (See Figure 1).

3.Pull the drawer away from the range.

To Replace Storage Drawer:

1.Pull the bearing glides to the front of the chassis glide (See Figure 2).

2.Align the glide on each side of the drawer with the glide slots on the range.

3.Push the drawer into the range until levers “click” (approximately 2”). Pull the drawer open again to seat bearing glides into position. If you do not hear the levers “click” or the bearing glides do not feel seated remove the drawer and repeat steps 1 thru 3. This will minimize possible damage to the bearing glides.

Removing and Replacing Warm & Serve Drawer (some models)

To Remove Warm & Serve Drawer:

1. Turn power off before removing the warm & Serve drawer.

2.Open the drawer to the fully opened position.

3.Locate glide lever on each side of drawer, pull up on the left glide lever and push down on the right glide lever (See Figure 1).

4.Pull the drawer away from the range.

To Replace Warm & Serve Drawer:

1.Pull the bearing glides to the front of the chassis glide (See Figure 2).

2.Align the glide on each side of the drawer with the glide slots on the range.

3.Push the drawer into the range until levers “click” (approximately 2”). Pull the drawer open again to seat bearing glides into position. If you do not hear the levers “click” or the bearing glides do not feel seated remove the drawer and repeat steps 1 thru 3. This will minimize possible damage to the bearing glides.

 

Latch

Left Glide

Pull up latch

with finger

 

Latch

 

Pull down latch

Right Glide

with finger

Figure 1

 

Bearing Glide

Figure 2

NOTE: The Warm & Serve Drawer will NOT operate while in the “Self-Clean” and “Oven Lockout” modes

Electrical Shock Hazard can occur and result in serious injury or death. Disconnect appliance from electric power before cleaning and servicing the warm & Serve drawer.

19

Page 18 Page 20
Page 19
Image 19
Frigidaire 318203870 warranty Removing and Replacing Warm & Serve Drawer some models, To Remove Storage Drawer
Page 18 Page 20

318203870 specifications

The Frigidaire 318203870 is a high-quality replacement part designed specifically for Frigidaire stove models, ensuring that your cooking appliances function optimally. As a fundamental component, the 318203870 igniter plays a crucial role in the ignition process, helping to ignite the gas in gas stoves and cooktops.

One of the standout features of the Frigidaire 318203870 is its exceptional durability. Built from high-quality materials, this igniter is designed to withstand extreme temperatures and repeated use, ensuring longevity and reliability in everyday cooking scenarios. This robustness makes it an essential component for busy kitchens where regular cooking is a must.

The Frigidaire 318203870 igniter boasts an efficient design that includes a ceramic insulator and a metal housing that provides excellent conductivity for optimal performance. This design helps to ensure that the igniter lights quickly and evenly, reducing the time you spend waiting for your burners to start. Whether you are simmering a sauce or searing meat, consistent igniter performance leads to better cooking results.

Installation of the Frigidaire 318203870 is straightforward, making it accessible even for those who might not consider themselves handy. The part is designed for seamless compatibility with various Frigidaire models, allowing for a hassle-free replacement process. Many users appreciate the ability to restore functionality to their appliances without needing professional assistance.

Additionally, the Frigidaire 318203870 is also recognized for its energy efficiency. The part helps ensure that gas is ignited quickly, minimizing wasted fuel and leading to a more environmentally friendly cooking experience. In a world increasingly focused on sustainability, this characteristic reflects Frigidaire's commitment to innovative technologies that enhance home cooking while being mindful of energy consumption.

In summary, the Frigidaire 318203870 igniter combines durability, efficiency, and ease of installation, making it an essential component for maintaining gas stove performance. With its innovative design and focus on energy efficiency, this replacement part exemplifies why Frigidaire remains a trusted name in home appliances. Whether you're replacing a worn-out igniter or simply enhancing your kitchen's functionality, the Frigidaire 318203870 serves as an excellent choice for reliable and efficient cooking.
Top Page Image Contents