Frigidaire 318204142 (0802) manual Control Pad Functions Model B, The oven can be programmed to

ELECTRONIC OVEN CONTROL

Control Pad Functions (Model B)

Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the various functions of the oven as described below. Note: The graphics on your timer may not look exactly like the one shown. This doesn't change the way it operates.

Note: The oven function will not work if the time of day clock is not set.

Bake Pad	Speed Bake	Speed Clean
Used to enter	Pad Used to	Pad Used to
the normal	enter the speed	select the
baking mode	bake mode	Speed Clean
temperature.	temperature.	cycle.

Bake Time	Up and Down arrow pads- Used
Pad- Used to	along with the function pads to select
enter the length	oven temperature, cooking time, start
of the baking	time (when programming an automatic
time.	start time), time of day, clean time and
	minute timer.

Clock Pad- Used to set the time of day.

Oven

Interior Light

Pad- Used to

Feature indicator lights- These light show

turn oven interior light ON and OFF.

which feature is in use.

Broil Pad- Used to select the variable broil function.

Keep Warm Pad- Used to set the Keep Warm feature.

Speed bake Nettoyage

Bake Cuisson Speed

Cuire rapide clean

Broil Keep warm Clean

Griller Garder Nettoyer chaud

Bake time		Clock
Temps de
		Horloge
cuisson
	Oven
	Four
Start time	Preheat	Timer	Clear/Off
	Préchauffage
Heure de	Door Locked	On/Off	Annuler
départ		Minuterie
	Porte Verrouillée

Speed Bake Oven

Four à Cuisson Rapide

Clear Off Pad- Used to clear any function previously entered except the time of day and minute timer. Push Clear pad to stop cooking.

Clean Pad Used to select the self- cleaning cycle.

Start Time Pad- Used to set the desired start time for baking. Can be used with BAKE TIME to program a delayed bake cycle.

Oven, Preheat & Lock lights- The "oven" light indicates that the oven is working. The "Preheat" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "Door Locked" light will flash until the door locks when the self-clean cycle is in use. It glows constantly after the door locks (some models).

Timer Pad- Used to set or cancel the minute timer. The minute timer does not start or stop cooking.

The oven can be programmed to:

Bake normally, Keep warm, Time Bake, Delayed Timed Bake (delayed start), Broil and Clean.

Note: Push buttons or pads may be shaped differently.

For a silent control panel:

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation.

To tell if your oven is set for normal or silent operation push and hold DELAY START or START TIME pad for 7 seconds. "- -" or "SP" appears in the display. Within 5 seconds, press the UP or DOWN ARROW pad to switch between normal sound operation and silent operation mode. The display will show either "- -" or "SP". Wait 5 seconds to return to normal operating mode.

Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation mode.

Temperature Conversion (Fahrenheit / Celsius)

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 288°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press and hold BROIL pad for 7 seconds until °F or °C appears in the display.

2.Press the UP or DOWN ARROW pad to change °F to °C or °C to °F.

3.Wait 5 seconds to accept the changes or press STOP or CLEAR/OFF pad to accept the changes.

2