induction COOKTOP INSTALLATION INSTRUCTIONS
If the cable from appliance is equipped with 3 wires:
Where local codes permit connecting the
1.Disconnect the power supply.
2.In the circuit breaker, fuse box or junction box, connect appliance and power supply cable wires as shown in figure 3.
You may not ground the cooktop through the neutral (white) wire if cooktop is used in a new branch circuit installation (1996 NEC),
If cooktop is used in a new branch circuit installation (1996 NEC), mobile home, recreational vehicle, or where local codes do not permit grounding to the neutral (white) wire (see figure 4):
1.Disconnect the power supply.
2.In the circuit breaker, fuse box or junction box, connect appliance and power supply cable wires as shown in figure 4.
Cable from Power Supply
mobile home, recreational vehicle, or where local codes do not permit grounding to the neutral
Ground Wire
White Wire
(white) wire.
Cable from Power Supply
White Wire (Neutral)
Red
WiresBlack Wires
| Junction Box |
| |
Green Wire (Ground) | Conduit Connector |
Cable from |
|
appliance |
|
Figure 3 -
When grounding to the neutral (white) wire is prohibited, you must use a
Red
Wires Black
Wires
| Junction |
| Box |
Green Wire (Ground) | |
| Connector |
Cable from appliance
Figure 4 -
WARninG If connecting to a
NOTE TO ELECTRICIAN: The armored cable leads supplied with the appliance are
4