Changing Color Panels (continued)
5.Arrange panel(s) so the desired color is facing out. Place one side of panel(s) under side trim and bow slightly until other side fits under opposite trim. Push down to make sure panel(s) and spacer are in channel of divider trim strip.
6.Move complete panel assembly up by pushing from sides and bottom of lower panel. Check to make sure the color panel(s) fit securely under control panel by pressing in at top of color panel(s).
Control panel
7.To change lower panel, use one hand to hold upper panel assembly and divider trim strip in place and use the other hand to slide lower panel down until it clears divider. Remove panel(s), arrange desired color and replace per above directions for upper panel. Do not remove foam spacer.
8.Replace bottom trim by fitting slot over bottom edge of door and secure by pressing from one side to the other. Note: If trim does not go on easily, check to make sure assembly is pushed all the way up under the control panel and spacers and panels are in channel of divider trim strip.
Customized Wood Panels
Your dishwasher can be customized with 1/4" wood panels. Refer to your Installation Instructions for more information.
15
