Connecting and Disconnecting the Portable/ Convertible Dishwasher (continued)
Getting Water While Dishwasher is Running
You can get water from the faucet while the dishwasher is connected. However, avoid getting water when the dishwasher is filling or draining.
1.Press red button on coupler to get the water you want. The faucet is set on hot, adjust faucet if you want cold.
2.Be sure hot water is turned back on all the way to complete cycle.
Fire Hazard/Electrical Shock
Do not use an adapter plug, extension cord or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.
Disconnecting the Portable/
Convertible Dishwasher
1.When cycle has finished, turn off hot water.
2.Press red button on coupler to release water pressure being careful not to release coupler.
3.Press down on collar to release coupler.
4.Empty remaining water from coupler and return it to compartment.
5.Unplug power cord and return it to compartment.
IMPORTANT: A sink spray attachment hose can burst due to constant water pressure while in use. If your spray hose is installed on same water line as the dishwasher, we suggest you disconnect the sink spray attachment and plug the hole.
Electrical Connection for a Portable/ Convertible Dishwasher
An electrical supply of 120 volts, 60 Hz, AC only, 15 amps is required. For your safety, the dishwasher must be grounded. If there is a malfunction or breakdown, grounding will reduce risk of electrical shock. This dishwasher has a power cord with a
Grounding type wall receptacle
Do not under any circumstances cut, remove or bypass the grounding prong from this plug.
Power supply cord with
plug
Converting to Built-In
Your portable dishwasher can be converted to a
13
