Chapter 2

C O N N E C T I O N S

Before Connecting the DVD-VCR

-Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.

Connecting a Set-top/Cable/Satellite Box to the DVD-VCR

The following instructions show how to connect a Set-Top Box,TV and Amplifier to the DVD-VCR.

1

Use a TV antenna cable to connect the signal source coming from the antenna or wall to the ANT IN jack on the STB.

2

Use the Video/Audio Cable to connect the LINE OUT jacks on the STB to the AUDIO/VIDEO LINE IN 1 jacks on the DVD-VCR..

3

Select LINE 1 by pressing LINE IN SELECT button on the front panel or INPUT SEL. button on remote control in VCR mode .

4

Use the Video/Audio Cable to connect the LINE AUDIO OUT(R/L)/VIDEO OUT jacks on the DVD- VCR to the Audio & Video jacks on the TV.

Tunerless DVD Player & VCR

Video Cable Audio Cable

Video Cable Audio Cable

This DVD-VCR unit does not have a TV tuner. Recording TV broadcasts is possible via Connection to Cable/Satellite boxes and Multi Channel Video Services.

Notes

-If you want to use other connections to a TV, please refer to the TV connection pages. (See pages 14 to 18)

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)

-When you connect a STB through the LINE IN 1 jack of the DVD-VCR, you still can see the picture from the STB on your TV set if the DVD-VCR is turned off.

ENG-13

Page 13
Image 13
LG Electronics DVD-V9800 Before Connecting the DVD-VCR, Connecting a Set-top/Cable/Satellite Box to the DVD-VCR, ENG-13