Frigidaire 700 Series warranty Changing Color Panels, Cut Hazard, To change the color panel

Changing Color

Panels

STEP 1

Color

Panel(s)

Cut Hazard

Metal door panels are sharp and should be handled with care. Wear gloves to protect hands.

Failure to do so can result in injury.

STEP 2

Side

Trim

Bottom

Trim

Spacer

Color Panel(s)

Some models come with reversible door panel inserts which offer three decorative colors.

To change the color panel:

1.Remove snap-on bottom trim by pulling forward. Support color panel(s) at bottom while removing trim. Slide color panel(s) downward 1/2 ".

Control Panel

STEP 3

Color Panel(s)

2.Grasp top and bottom of panels and bow slightly until they are clear of trim. DO NOT REMOVE SPACER.

3.Arrange panel(s) so desired color is facing out. Place one side of panel under side trim and bow slightly until other side fits under opposite trim. Slide panel(s) up to fit under control panel.

4.Replace bottom trim by fitting slot over bottom edge of door and press to secure.

STEP 4 Customized Wood Panels

Some models can be customized with 1/4" wood panels. Refer to your installation instructions for more information.

Bottom

Trim

Bottom Edge of Door

14