Frigidaire Air Conditioner Operating Instructions, To AD3UST FAN Speeds YOU will see, Do this

Operating Instructions

TO CHANGE TEMPERATURE SETTING: YOU WILL SEE:

temp/timer 1

auto

mhi med

lo

heat

[] cool

energy saver

fan onty

DO THIS:

PRESS A TO RAISE

V TO LOWER

temp/timer

auto

[] hi

reed

/o

heat

[] cool

energy saver

fanonly

Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 60 °F (16 °C) and 90 °F (32 °C) for cooling mode. The temperature will be auto- matically maintained anywhere between 55 °F (13 °C) and 80 °F (27 °C) for heating mode. If you want the display to read the actual room temperature. See "To Operate on Fan Only" section on this page.

TO AD3UST FAN SPEEDS: YOU WILL SEE:

re•p/timer

auto

[] hi med

Io

[] COOl

energy saver

#n o,Zy

DO THIS:

PRESSTO SELECT

temp/dmer

auto

hi

med

mlo

heat

[] cool

energy saver

#n only

TO USE AUTO FAN FEATURE, YOU WILL SEE:

iemp/tirner

auto

hi med

mlo

[] cool

energy saver

fan omy

DO THIS:

PRESS FAN

BUTTON

SELECT AUTO

l_mp/timer

[] aUtO

hi med

lo

heat

[] cool

energy save_

#, only

Note: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example, if the room doesn't get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will auto- matically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature. Press either the fan slower or fan faster button to adjust the fan speed manually. This function is deactivated in the heating mode on 115V models.

TO OPERATE ON FAN ONLY: YOU WILL SEE"

ternp/timer

[] auto

hi

n_ed

heat

[] cool

energy saver

DO THIS:

PRESS

MODE BUTTON

CHOOSE

FAN ONLY

ternp/timer

auto

[] hi

med

heat

cool

energy saver

[] fan o._

Note: Use this function onl' when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Except "Auto Fan").

During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. Fan Only cannot be selected when the unit is in the "Remote Sensing" mode. (on those units with that feature).

@2009 Electrolux Home Products, Inc. All rights reserved.