Air Conditioner Features
(continued)
TO CHANGE TEMPERATURE
SETTING:
DO THIS:
PRESS TO
RAISE
PRESS TO
LOWER
TO ADJUST FAN SPEEDS:
DO THIS:
PRESS TO
SELECT:
FASTER
SLOWER
YOU WILL SEE:
Note: Tap or hold either up( ) or down( ) button until the desired temperature is seen on the display. This tempera- ture will be automatically maintained anywhere between 60˚F (16˚C) and 90˚F (32˚C). If you want the display to read the actual room temperature. See “To Operate on Fan Only” sec- tion on Page 7.
YOU WILL SEE:
A 2 Digit Display is used to indicate the Fan Speed setting, from 10 through 99. When the “SLOWER” button is pressed the motor speed will slow down at multiple intervals (90 distinct settings), to a minimum setting of 10. To speed the motor up, press the “FASTER” button. The speed will increase at multiple intervals to a maximum setting of 99. After 5 seconds the control will automatically change back to displaying the set temperature.
TO USE AUTO TEMP FEATURE:
DO THIS:
PRESS AUTO
TEMP
BUTTON
YOU WILL SEE:
LIGHT On
Note: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example if the room doesn’t get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go to the highest speed. The fan speeds will
6
6 | 09/20/2005, 5:30 PM |