Air Conditioner Features
(continued)
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
•The “Cool “ circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
•The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
•The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other and back,
press and hold the “TEMP/TIMER” Up ( 
) and Down ( 
) buttons together for 3 seconds.
Fresh Air Vent Control (On some models)
The Fresh Air Vent allows the air conditioner to:
1.Recirculate inside air - Vent Closed (see Fig. 1)
2.Draw fresh air into the room - Vent Open (see Fig. 2)
3.Exchange air from the room and draws fresh air into the room - Vent and Exhaust Open (see Fig. 3)
Figure 1 (VENT CLOSED)
Figure 2 (VENT OPEN) | Figure 3 (VENT & EXHAUST OPEN) |
AUGER WHEELS
Air Directional Louvers
Air directional louvers control air flow direction. Your air conditioner has the louver type described below.
Auger Type
The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed. Rotate the Auger Wheels until the desired Left/Right direction is obtained. Pivot horizontal louvers until the desired Up/Down direction is obtained.
9
9 | 09/20/2005, 5:30 PM |
