Frigidaire FFEF3019MS Setting a self-clean cycle or a delayed start self-clean cycle, Clean

Models: FFEF3019MW FFEF3019MS FFEF3019MB

1 32
Download 32 pages 39.58 Kb
Page 22
Image 22
Setting a self-clean cycle or a delayed start self-clean cycle

CLEAN

Setting a self-clean cycle or a delayed start self-clean cycle

Setting a self-clean cycle

1.Remove all items from the oven, cooktop, and all oven racks from the oven and be sure the oven door is completely closed. Be sure the oven control displays the correct time of day and adjust if needed.

Setting a self-clean cycle NOTE

To start a self-clean cycle immediately without delay, skip steps 2 & 3 in the instructions provided below.

2.Press the start time keypad. The ":" in the time of day display will flash.

3. Press and hold the

keypad to scroll to the time to

start a delayed self-clean cycle. Release the keypad when the desired start time is displayed.

4. Press the clean keypad. "---" appears in the display.

5. To start press the

or

keypad once. "3:00" will

appear in the display indicating that a 3 hour self-clean time is set. To change to a shorter 2 hour self-clean

time press the

keypad once ("2:00" will appear in

the display indicating a 2 hour clean time is desired).

When the self-clean cycle has completed: IMPORTANT

Once the oven control is set for clean, the motor driven lock will begin to automatically lock the oven

door. The "door locked" indicator light will flash while

the oven door is locking. DO NOT open the oven door while this indicator light is flashing (allow about 15 seconds for the oven door to completely lock).

6."CLn" will appear in the oven display during the self- clean cycle and the "door locked" indicator light will remain ON until the self-cleaning cycle is complete or cancelled and the oven temperature has cooled.

When the self-clean cycle has completed:

1.The time of day will appear in the oven display and the "clean" and "door locked" indicator lights will continue to glow.

2.Once the oven has cooled down for about 1 hour and the "door locked" light has turned off, the oven door may be opened.

Stopping or interrupting a self-clean cycle

If it becomes necessary to stop or interrupt a self- cleaning cycle once it has been activated:

1.Press the clear off keypad.

2.Once the oven has cooled down (about 1 hour) and the "door locked" indicator light has turned off, the oven door may be opened.

3.If needed, the self-clean may be restarted.

Stopping or interrupting a self-clean cycle CAUTION

To avoid possible burns use care when opening the oven door after the self-cleaning cycle is finished. Stand to the side of the oven when opening the oven door to allow any hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the oven door after the self-cleaning cycle has completed. The oven may still be VERY HOT.

Manual background NOTES

Whenever the clean feature is active you may check the amount of time remaining in the self-clean cycle by pressing the clean keypad once. Remember the oven door will not unlock until the range has cooled sufficiently. You will need to add about 1 hour to the time displayed before you can use the oven for cooking again.

After the oven has completely cooled and the oven door has unlocked, wipe away any residue or powdered ash from the oven interior using a damp cloth or paper towel.

22

Page 22
Image 22
Frigidaire FFEF3019MS, FFEF3019MB, FFEF3019MW Setting a self-clean cycle or a delayed start self-clean cycle, Clean