TO SET THE CLOCK
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
1.Press CLOCK briefly (do not hold pad down).
2.Within 5 seconds, press and hold the 
or 
until the correct time of day appears in the display.
Note: The clock cannot be changed during any Bake or
NOTE
•The time of day must first be set in order to operate the oven.
•To turn the time of day display OFF or ON in the display press CLOCK and hold for 15 seconds (the control will beep once) and then release. This feature does not remove the set time of day from the memory of the control. When the display is turned OFF the time of day will reappear for a few seconds any time the CLOCK pad is touched.
FOR A SILENT CONTROL PANEL
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for silent operation. Press and hold START TIME. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pressed. To return the sound, press and hold DELAY START again for 7 seconds until the control beeps once.
SETTING OVEN CONTROLS
TO SET THE MINUTE TIMER:
1.Press TIMER on-off.
2.Press the 
to increase the time in one minute increments. Press and hold the 
to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If the 
pad is pressed first, the timer will advance to 11 hours and 59 minutes.
3.The display shows the timer countdown in minutes until 1 minute remains. Then the display will countdown in seconds.
4.When the set time has run out, the timer will beep 3 times. It will then continue to beep 3 times every 60 seconds until TIMER
NOTE
•The indicator light located above the TIMER
•The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the 
or 
to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out:
Press TIMER
13
