Frigidaire FFES3027LS Self-Cleantime Length, When the Self-CleanCycle is Completed, Self-Cleaning

SELF-CLEANING

SELF-CLEAN TIME LENGTH

For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average or a 4 hour cycle for heavy soils.

NOTE

The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the Self-Clean cycle. This will help eliminate the normal odors associated with the Self-Clean cycle.

To Set the Controls for a Self-Clean Cycle or a Delayed Start Self-Clean Cycle:

NOTE

If you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.

1.Be sure the clock shows the correct time of day.

2.Press START TIME. The “ : “ in the time of day will flash.

3.Press and hold the pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed.

4.Press CLEAN. “— — —” appears in the display.

5.Press the or once. “3:00” appears in the display for a 3 hour cycle. To change to a 2 hour cycle press . “2:00” appears in the display or to select a 4 hour cycle press . “4:00” appears in the display.

As soon as the controls are set, the motor driven lock will begin to close automatically and the “DOOR LOCK” indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).

6.“CLn” will appear in the display during the Self-Clean cycle and the “DOOR LOCK” light will glow until the Self-Cleaning cycle is complete or cancelled and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1.The time of day or “End” will appear in the display window and the “Clean” and “DOOR LOCK” light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the “DOOR LOCK” light has gone out, the oven door can be opened.

3.If “End” is in the display and the Select Clean indicator light remains ON, press CLEAR. The time of day will appear in the display.

NOTE

When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or Interrupting a Self-Cleaning Cycle:

If it becomes necessary to stop or interrupt a Self- Cleaning cycle:

1.Press CLEAR.

2.Once the oven has cooled down for about 1 HOUR and the “DOOR LOCK” light has gone out, the oven door can be opened.

3.Restart the Self-Clean cycle once all conditions have been corrected.

CAUTION

To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the Self-Cleaning cycle is completed. The oven may still be VERY HOT.

20