Setting OVEN controls
Control Pad Features
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide. The graphics on your timer may not look exactly like the one shown. This doesn’t change the way it operates.
NOTE
All instructions are given for the UPPER oven. If lower oven is used the indicator lights will appear in the right portion of the display.
1.Bake Pad— Used to enter the normal baking mode temperature.
2.Broil
3.Clean
4.Keep warm Pad— Used to set the Keep Warm feature.
5.Bake time Pad— Used to enter the length of the baking time.
6.Start time Pad— Used to set the desired start time for baking. Can be used with BAKE TIME to program a delayed bake cycle.
7.Clear off Pad— Used to clear any function previously entered except the time of day and minute timer. Push Clear off pad to stop cooking.
8.Start on— Used to start all oven functions. Not used with Oven Light.
9.Oven Interior Light Pad— Used to turn oven interior light ON and OFF.
10.Clock Pad— Used to set the time of day.
11.Down arrow
12.Up arrow
13.Timer On•Off Pad— Used to set or cancel the minute timer. The minute timer does not start or stop cooking.
Setting Silent Control Operation
The Start time pad controls the Silent Control Operation feature. The Silent Control Operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control operation
1.Press and hold Start time pad for 6 seconds. A beep will sound,
2.Press Up or Down arrow pad to switch between normal sound operation and silent operation mode.
NOTE
If “SP” appears, the control will operate with normal sounds and beeps. If “-
3.Press Start pad or wait 5 seconds to accept the change. Press Clear off pad to reject the change.
8