DOOR REMOVAL INSTRUCTIONS

Getting through narrow spaces

If your refrigerator will not fit through an entrance area, you can remove the doors. Check first by measuring the entrance.

To prepare for removing the doors:

1Make sure the electrical power cord is unplugged from the wall outlet.

2Open the freezer drawer and remove the toe grille (see “Installation” section).

3Remove any food from the door shelves and close the doors.

To remove the top hinge covers:

1Remove the two screws from each cover over the top door hinges.

2Lift inside edge of hinge cover and tilt back.

 

Front

 

Rear

 

Cover Screw

 

Cover

Top Hinge

 

Screw

Cover

 

 

 

Hinge

 

 

Ground

Screws

 

Screw

Multi-wire

 

 

Cables

 

 

Top

Leave

 

 

Hinge

 

 

 

Hinge

 

 

 

With

 

 

 

Door

 

 

 

Rear

 

Front

 

 

Cover Screw

 

Cover

 

 

Screw

 

 

Top Hinge

 

 

 

 

 

 

Cover

Top

Ground

Hinge

Screws

Screw

 

Hinge

 

Two Wire

 

 

 

 

 

 

Cables

Leave

Hinge

With

Door

NOTE

To remove the refrigerator doors:

1Trace lightly around the door’s top hinges with a pencil. This makes reinstallation easier.

2Disconnect the harness by grasping both sides of the connector firmly, depress the latch, and pull apart. Remove the two screws from the top hinge. Lift the door off of the bottom hinge and set it aside.

DO NOT remove the ground screw from hinge.

9

Page 9
Image 9
Frigidaire FFHN2740PSPKG Door Removal Instructions, Getting through narrow spaces, To prepare for removing the doors