Top Mount Refrigerator
FFHT1521QW 15 Cu. Ft.
Top View | Recessed water line | Recessed |
(ice maker models only) | electrical outlet |
Allow 1" min. clearance at rear for proper air circulation and water / electrical connections
Allow 3/8" min. clearance at sides and top for ease of installation
When installing directly adjacent to wall, sufficient handle clearance required where handle may make contact with wall, to allow for 90° door opening*
*When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 140° door swing, providing complete crisper access and removal. (Absolute
3" minimum clearance will ONLY allow for 90° door swing which will provide limited crisper access with restricted removal.)
29 7/8"28"
60 5/8" with
3/8"
rollers
59 7/8" | Water |
with | line inlet |
3/8" | location |
rollers | (left |
| bottom |
| rear) |
| Power |
| cord |
| location |
| |
| (right |
| bottom |
| rear) |
26 5/8"
31 7/8"
Allow 56" min. (with doors 90° open)
Top Mount Refrigerator Specifications
•Product Shipping Weight (approx.) – 175 Lbs.
•An electrical supply with grounded
•Voltage Rating – 120V / 60 Hz / 15 Amps
•Connected Load (kW Rating) @ 120 Volts = .72 kW
•Amps @ 120 Volts = 6.0 Amps
•Always consult local and national electric & plumbing codes.
•Floor should be level surface of hard material, capable of supporting fully loaded refrigerator.
•Minimum 3/8" clearance required for sides and top of refrigerator with 1" clearance at rear to allow for ease of installation, proper air circulation, and plumbing / electrical connections.
•When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 140° door swing, providing complete crisper access and removal. (Absolute 3" minimum clearance will ONLY allow for 90° door swing which will provide limited crisper access with restricted removal.)
•To ensure optimum performance, do not install in areas where temperature drops below 55° F or rises above 110° F and avoid installing in direct sunlight or close proximity to range, dishwasher or other heat source.
•For proper ventilation, front grille MUST remain unobstructed.
•Recess electrical outlet when possible.
•Optional Ice Maker Kit (PN # IM116) available for installation in ice
•Water recess on rear wall recommended to prevent water line damage.
•Water Pressure – Cold water line must provide between 30 and 100 pounds per square inch (psi).
•Copper tubing with 1/4" O.D. recommended for water supply line with length equal to distance from rear of unit to household water supply line plus 7 additional feet. Optional Water Supply Installation Kits available.
Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.
Optional Accessories
•Ice Maker Kit – (PN # IM116).
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • | Specifications | |
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • | ||
subject to change. |
FFHT1521Q 07/14 | © 2014 Electrolux Home Products, Inc. |
