AVOID SERVICE CHECKLIST

OCCURRENCE

POSSIBLE CAUSE

SOLUTION

 

 

 

OPERATING, CONTINUED

 

 

 

 

 

Excessive wrinkling.

Dryer is overloaded.

Do not overload. See “Operating Instructions.”

 

 

 

 

 

 

Items left in dryer too long.

Remove items as soon as cycle ends.

 

 

 

 

 

 

Insufficient sorting of items.

See “Operating Instructions.”

 

 

 

 

 

 

Drying temperature too high.

Follow fabric care label instructions.

 

 

 

Scratching or chipping of

Foreign objects such as coins, pins, clips or buttons

Always remove foreign objects from pockets before laundering.

the drum finish.

are inside the dryer.*

Remove objects from drum and restart dryer.

 

 

Permanently attached items such as belt buckles, zippers

Turn items inside out before drying to prevent scratching and dam-

 

 

and fasteners may be hitting the inside of the drum.*

age to the dryer.

 

 

*Drum damage caused by foreign objects or permanently attached items is not covered by the warranty.

 

 

 

WATER

 

 

 

 

 

Wash load too wet after

Washer is overloaded.

Do not overload washer. See Washing Procedures.

spin.

 

 

 

 

Load is out of balance.

Rearrange load to allow proper spinning.

 

 

 

 

 

 

 

 

Drain hose is kinked.

Straighten drain hose.

 

 

 

Water does not enter

Washer lid is open.

Close washer lid. The washer will not operate when the lid is open.

washer or it enters slowly.

 

 

 

 

Water supply is not adequate in area.

Check another faucet in the house. Wait until water supply and

 

 

 

 

 

pressure increase.

 

 

 

 

 

 

Water supply faucets are not completely open.

Fully open hot and cold faucets.

 

 

 

 

 

 

Water is being used elsewhere in the house.

Water pressure must be at least 10 psi (69 kPa). Avoid running

 

 

 

water elsewhere while washer is filling.

 

 

 

 

 

 

Water inlet hoses are kinked.

Straighten hoses.

 

 

 

Water level does not

Improper water level selection (for models with

Select higher water level/load size.

cover load.

water level/load size control).

 

 

 

 

 

 

 

Washer is overloaded.

Do not overload washer.

 

 

 

Warm or hot water is not

Hot water heater is set too low or is a distance

Measure hot water temperature at nearby faucet with candy

hot enough.

from washer.

or meat thermometer. Water temperature should be at least

 

 

 

120°F (50°C). Adjust water heater as necessary.

Hot water is being used elsewhere in the house.

Avoid using hot water elsewhere before or during washer use. There may not be enough hot water available for proper clean- ing. If problem persists, your hot water system may be unable to support more than 1 use at a time.

Water in washer does not drain or drains slowly.

Drain hose is kinked or clogged.

Clean and straighten the drain hose.

Water leaks.

Loose fill hose connection at faucet or washer.

Check and tighten hose connections. Install rubber sealing washers provided.

 

House drain pipes are clogged.

Unclog drain pipes. Contact plumber if necessary.

 

 

 

Incorrect wash and rinse

Hot and cold water hoses are connected to wrong

Connect hot water hose to hot water faucet and cold water

temperatures.

supply faucets.

hose to cold water faucet.

 

 

 

Water is entering washer

Drain hose standpipe is incorrect height.

Standpipe must be a minimum of 33” (83.82 cm) high to pre-

but tub does not fill.

 

vent siphoning. See INSTALLATION INSTRUCTIONS.

 

 

 

Water is present in tub after

Lid lock malfunction.

Do not bypass lid lock. Call your authorized servicer.

wash cycle is complete.

 

 

 

 

 

The drain and spin cycles

Lid lock malfunction.

Do not bypass lid lock. Call your authorized servicer.

did not occur.

 

 

 

 

 

21

Page 20 Page 22
Page 21
Image 21
Frigidaire FFLE2022MW, FFLE1011MW important safety instructions Water
Page 20 Page 22

FFLE2022MW, FFLE1011MW specifications

The Frigidaire FFLE1011MW and FFLE2022MW are two innovative laundry machines designed to offer efficiency, convenience, and cutting-edge features for modern households. Both models are known for their space-saving designs, making them ideal for apartments, small homes, or laundry niches.

The FFLE1011MW is a compact, stackable washer and dryer combo that boasts a 1.0 cubic foot capacity. This model is perfect for anyone who needs powerful cleaning capabilities without sacrificing valuable space. It comes with multiple wash cycles, including options for delicate fabrics and bulk items, ensuring that every load is treated with care. The user-friendly control panel simplifies selecting the appropriate settings for different laundry types, while the front-load design allows for easy loading and unloading.

On the other hand, the FFLE2022MW is a larger capacity model, offering 2.2 cubic feet. This additional space makes it suitable for larger households or those dealing with frequent laundry tasks. Similar to the FFLE1011MW, this model features multiple wash cycles and is equipped with a powerful motor to tackle tough stains effectively. It also offers a sanitize cycle, which is particularly beneficial for homes with young children or individuals with allergies.

Both models incorporate innovative technologies to enhance their performance. The high-efficiency design ensures that these machines consume less water and energy compared to traditional counterparts, making them environmentally friendly and cost-effective. They feature a durable stainless-steel drum that resists rust and chipping, ensuring longevity and a clean wash with every use.

Another standout feature is the option for automatic load sensing. This technology allows the machines to adjust water levels based on the size of the load, optimizing water usage and minimizing waste. Additionally, the machines operate quietly, making them suitable for use in shared living spaces without causing disruptions.

Overall, the Frigidaire FFLE1011MW and FFLE2022MW provide versatile and reliable solutions for all your laundry needs. Their combination of compact design, advanced features, and user-friendly controls makes them excellent choices for anyone looking to simplify their laundry routine while maintaining high standards of cleanliness and efficiency. Whether you choose the smaller FFLE1011MW or the more spacious FFLE2022MW, both are built to deliver exceptional performance in today's fast-paced living environments.
Top Page Image Contents