Frigidaire FGTC2349K Side-by-SideRefrigerator Specifications, “Built-InLook” Specifications

Side-by-Side Refrigerator

FGTC2349K S 23 Cu. Ft. Counter-Depth

Side-by-Side Refrigerator Specifications

•Panel kit-ready refrigerator doors require installation

of either optional Door Panel Kit or custom-built door panels. (For details, refer to Door Panel Installation on this page.)

•Product Shipping Weight (approx.) – 325 Lbs.

•Voltage Rating – 120V / 60 Hz / 15 or 20 Amps

•Connected Load (kW Rating) @ 120 Volts = 1.02 kW

(For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.)

•Amps @ 120 Volts = 8.5 Amps

•Always consult local and national electric & plumbing codes.

•Floor should be level surface of hard material, capable of supporting fully loaded refrigerator.

•When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 120° to 180° door swing, providing complete drawer / crisper access and removal. (Absolute 4-1/2" minimum clearance will ONLY allow for 90° door swing which will provide drawer / crisper access with restricted removal.)

•To ensure optimum performance, avoid installing in direct sunlight or close proximity to range, dishwasher or other heat source.

•For proper ventilation, front grille MUST remain unobstructed.

•Recess electrical outlet when possible.

•Water recess on rear wall recommended to prevent water line damage.

•Water Pressure – Cold water line must provide between 30 and 100 pounds per square inch (psi).

Note: Optional Collar Kit available to complete “built-in look” for Panel Kit-Ready Refrigerator. For specifications, refer to Collar Kit (CK23CDS) Installation Specifications page on web.

•Copper tubing with 1/4" O.D. recommended for water supply line with length equal to distance from rear of unit to household water supply line plus 7 additional feet. Optional Water Supply Installation Kits available.

•Adjustable front rollers to assist with door alignment.

“Built-In Look” Specifications

•Minimum opening of 70-1/4" H x 36" W x 25" D required to allow for ease of installation, proper air circulation, and plumbing / electrical connections.

•If optional Collar Kit (PN # CK23CDS) is to be used, different cutout dimensions are required. (Refer to Collar Kit CK23CDS Installation Specifications page on web.)

•Remove all wall / floor molding prior to installation.

Door Panel Installation

•Removable door trim is designed to accept either optional stainless steel Door Panel Kit or custom-built door panels to match cabinetry or other decor. (For complete custom panel construction and installation details, refer to Panel Kit-Ready Refrigerator Door Panel Installation page on web; for complete Door Panel Kit installation refer to detailed instructions on web or included with kit.)

Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.

Optional Accessories

•Stainless Steel Door Panel Kit – (PN # PK23CDS).

•Stainless Look Collar Kit – (PN # CK23CDS).

FRIGIDAIRE®

USA • 250 Bobby Jones Expressway • Martinez, GA 30907	• 1-800-FRIGIDAIRE • frigidaire.com	Specifications
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4	• 1-800-265-8352 • frigidaire.ca
		subject to change.

FGTC2349K 06/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.