Frigidaire FHWC3060LS Installing the hood, Desired range hood distance above a 36” high cook top

8Installing the hood

fig.

	Ceiling
	0.9”
Long	9.8”
screws	9.3”
	9.13”

•Insert 2 screws (10 or 14) in the top location, but

do not fully insert the screws (fig. ). Mount the range hood (1) to the wall and tighten the screws. Insert and tighten the 2 remaining screws on the bottom location of the range hood (fig. /).

•Attach the collar (6) to the range hood (1). Secure with 2 short screws (12) (fig. ).

Wood	9.8”
		10”
screws	7.5”
		Dimension
Wall		A
		(see table)

fig.

fig.

0.08”

fig.

0.08”

fig.

Desired range hood distance above a 36” high cook top

Ceiling height

	8 Feet	9 Feet	10 Feet *1
	A*2	A*2	A*2
26”*3	28-3/32”
27”*3	29-3/32”
28”*3	30-3/32”		30-3/32”
29”*3	31-3/32”	31-3/32”	31-3/32”
30”*3	32-3/32”	32-3/32”	32-3/32”
31”*3	33-3/32”	33-3/32”	33-3/32”
32”*3	34-3/32”	34-3/32”	34-3/32”
33”		35-3/32”	35-3/32”
34”		36-3/32”	36-3/32”
35”		37-3/32”	37-3/32”

*1: with 10’ extension chimney kit FHW10X60LS

(16)(not supplied). Please call Frigidaire at 1.800.944.9044 to order this kit.

*2: “Dimension A” in the chart represents the height from cook top to where the bottom screw mounting holes would be located.

*3: Recommended mounting height

Step 2:

•Install the range hood (1) either with wood screws or long screws, depending on the wall type:

Wall type	Required screws
Wood	4 wood screws (14)
Brick/Concrete	4 long screws (10)

NOTE

Sometimes, sponge tape covers the holes. If the holes are located behind the sponge tape, simply insert the screw through the sponge tape.

Step 3:

•Mount the glass cover (2) onto the range hood

(1). Use the allen key (13) to secure with 4 sets of bolts, rubber washers, and washers (9) (fig. ).

fig.

Step 4:

•Mount upper and lower brackets (4, 5) on the wall. Secure with the remaining 4 sets of long screws (10). The notches of the lower bracket should be facing up towards the ceiling (fig. ).

•Attach the exhaust duct (fig. ).

GB