Important Safety Instructions

NOTE:

This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance.

NOTE:

The power supply cord with

this air conditioner contains a current detection device designed to reduce the risk of fire.

Please refer to the section ‘Operation of Current Device’ for details.

In the event that the power supply cord is damaged, it cannot be repaired. It must be replaced with a cord from the product manufacturer.

WARNING

Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.

Grounding type wall receptacle

Do not, under any circumstances, cut, remove, or bypass the grounding prong.

Power supply cord with 3-prong grounding plug and current detection device

WARNING

For Your Safety

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings.

WARNING

Prevent Accidents

To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions, including the following:

Be sure the electrical service is adequate for the model you have chosen. This information can be found on the serial plate, which is located on the side of the cabinet and behind the grille.

If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass first. If the window is a triple-track type with a screen panel included, remove the screen completely before installation.

Be sure the air conditioner has been securely and correctly installed according to the separate installation instructions provided with this manual. Save this manual and the installation instructions for possible future use in removing or reinstalling this unit.

When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front and rear coils.

WARNING

Electrical Information

The complete electrical rating of your new room air conditioner is stated on the serial plate. Refer to the rating when checking the electrical requirements.

Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three-prong grounding plug for protection against shock hazards.

Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle.

Do not run air conditioner without outside protective cover in place. This could result in mechanical damage within the air conditioner.

Do not use an extension cord or an adapter plug.

READ THIS SECTION BEFORE ATTEMPTING TO OPERATE AIR CONDITIONER.

Unit must be upright for one hour prior to operating.

Plug in & press RESET

The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following:

Plug in the Air Conditioner.

The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will notice a click as the RESET button pops out.

Press the RESET button. Again you will notice a click as the button engages.

The power supply cord is now supplying electricity to the unit. (On some products this is also indi- cated by a light on the plug head).

NOTE:

Do not use this device to turn the unit on or off.

Always make sure the RESET button is pushed in for correct operation.

The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or it cannot be reset. A new one can be obtained from the product manufacturer.

If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained from the product manufacturer.

2

2009 Electrolux Home Products, Inc.

All rights reserved.

 

 

 

 

Page 1 Page 3
Page 2
Image 2
Frigidaire FRA103BT1, 2020215A0320 Important Safety Instructions, Grounding type wall receptacle
Page 1 Page 3

FRA103BT1, 2020215A0320 specifications

The Frigidaire FRA103BT1 is a cutting-edge air conditioning unit designed to provide exceptional cooling performance while maintaining energy efficiency. Featuring a sleek and compact design, this model is ideal for both residential and commercial spaces, making it a versatile choice for anyone seeking relief from the heat.

One of the standout features of the FRA103BT1 is its powerful 10,000 BTU cooling capacity, which allows it to effectively cool rooms up to 450 square feet. This makes it suitable for medium-sized rooms, ensuring that you can enjoy a comfortable environment even on the hottest days. The unit is equipped with a user-friendly, electronic control panel that includes a digital thermostat and a remote control, enabling you to adjust the temperature settings from anywhere in the room.

Energy efficiency is a significant consideration in today's market, and the Frigidaire FRA103BT1 excels in this area with an Energy Efficiency Ratio (EER) of 12.1. This means it consumes less energy while delivering powerful cooling, which can translate to lower electricity bills over time. The unit is also ENERGY STAR® certified, indicating that it meets stringent energy efficiency guidelines set by the U.S. Environmental Protection Agency.

In addition to its cooling capabilities, the FRA103BT1 features a built-in dehumidifier function, which can remove up to 3.4 pints of moisture per hour. This is especially beneficial in humid climates, as it helps maintain a comfortable indoor atmosphere without introducing excess humidity that can lead to mold and mildew growth.

The unit also offers multiple fan speeds and cooling modes, allowing users to tailor the airflow to their preferences. The convenient "Sleep Mode" adjusts the temperature automatically while you rest, ensuring a pleasant sleeping environment without the need for constant adjustments. Furthermore, the unit is designed with a washable respiratory filter that helps keep indoor air clean and free from allergens.

Installation of the FRA103BT1 is straightforward, thanks to its window-mounted design, adjustable side panels, and included installation kit. This makes it an accessible option for those who prefer a DIY approach without the need for professional assistance.

In summary, the Frigidaire FRA103BT1 is a reliable and efficient air conditioning unit that combines powerful cooling performance, energy efficiency, and user-friendly features. With its advanced technologies, this unit is a superb choice for anyone seeking comfort and climate control in their living or working space.
Top Page Image Contents