Frigidaire 2020215A0320 Timer Delay Stop / Start Feature, Check Filter Feature, You Will See

Models: 2020215A0320

1 12
Download 12 pages 37.81 Kb
Page 7
Image 7
TIMER: DELAY STOP / START FEATURE

 

 

 

 

 

 

 

 

 

Operating Instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating Instructions

 

 

 

 

 

 

 

 

 

(continued)

 

 

 

 

 

 

 

 

 

TIMER: DELAY STOP / START FEATURE

 

YOU WILL SEE HOW MUCH TIME IS CHOSEN:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FIRST

DO THIS:

PRESS

TIMER BUTTON

THEN

DO THIS:

PRESS

UP/DOWN BUTTONS

Note: For Delay Stop, the unit must be in the On position.

Note: For Delay Start, the unit must be in the Off position.

First, Press TIMER button, then adjust timer setting, tap or hold the UP arrow ( YOU WILL SEE HOW MUCH TIME IS CHOSEN: ) or the DOWN arrow ( FIRST ) to change delay timer at 0.5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.). The Delay Start Operation automatically selects cooling with maximum Fan speed (if Cool, Energy Saver, or Fan Only was the last mode selected) . The temperature maintained will be the same as previously set. To change the set temperature, press "COOL" then Up or Down arrows until the desired temperature is indicated on the display. After 5 seconds, the control will automatically change the display back to the hours remaining until the unit will start/stop. Pressing the unit On/Off button at any time will cancel the Delay Start/Stop function. The Delay Start/Stop Feature will work until the unit either starts or stops. Once that happens the above steps have to be repeated again.

CHECK FILTER FEATURE, YOU WILL SEE:

Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Filter Reset" button and the light will go off.

CLEAN AIR FEATURE(on some models):

DO THIS:

PRESS

CLEAN AIR

BUTTON

DO THIS:

PRESS FILTER

RESET BUTTON

Note: When this feature is "ON", the electronic air purifier is energized to remove pollen and impurities from the air. To cancel this feature, press the Clean Air button (the LIGHT will turn off).

Note: This feature can be activated on the unit touch pad ONLY.

THEN2009 Electrolux Home Products, Inc.

All rights reserved.

7

Page 7
Image 7
Frigidaire 2020215A0320 Timer Delay Stop / Start Feature, Check Filter Feature, You Will See, Operating Instructions