Frigidaire FRA123PT1, 2020252A0373 Installation in a double-hung sash window

Installation Instructions

Installation Instructions

(continued)

Installation in a double-hung sash window
1.	Cut the foam seals(adhesive type) to the proper lengths and attach them
	to the window and stool. (Fig. 12)	Foam seal A
2.	Attach the window slider kit to the window stool. Adjust the length of	(adhesive type)
	the window slider kit according to the width of window. Cut the adjustable
	window slider kit if the width of window is less than 26.6 inches (Fig. 14).	Fig. 12
	Open the window sash and place the window slider kit on the window
	stool. (Fig. 13)
4. Close the window sash securely against the window slider kit. (Fig. 15)
5.	Cut the foam seal to an appropriate length and seal the open gap	Window slider kit
	between the top window sash and outer window sash, as shown in Fig.16.

		26.6"~48.5"
		Window stool	Fig. 13
		Foam seal
Window slider kit		Cut this side to fit your window
Window stool	Fig. 15	Fig. 16
			Fig. 14

Installation in a sliding sash window

1.Cut the foam seals(adhesive type) to the proper lengths and attach them to the window frame. See Fig.17.

2.Attach the window slider kit to the window stool. Adjust the length of

the window slider kit according to the height of window. Cut the adjustable window slider kit if the height of window is less than 26.6 inches (Fig. 14). Open the window sash and place the window slider kit on the window stool. See Fig.18.

4.Close the sliding sash securely against the window slider kit. (Fig. 19)

5.Cut the foam seal to an appropriate length and seal the open gap between the sliding sash and outer window sash, as shown in Fig.20.

Foam seal

Fig. 19 Fig. 20

Foam seal (adhesive type)

Fig. 17

Window slider kit

26.6"~48.5" Window stool

Fig. 18

6 2009 Electrolux Home Products, Inc. All rights reserved.