NOTE: Turn blower and lights off. Make sure the lights are cool. If new lights do not operate be sure lights are inserted correctly before calling service.
Replace Lights (Figure 14)
•Remove lens cover by removing screw and pulling cover down.
•Pull out fluorescent tube and replace with Philips Type
•Replace cover and secure with screw.
Figure 14 |
Figure 15 |
NOTE: Disconnect the hood from the electricity before checking or replacing fuses.
•Fuses are located on the bottom of blower behind filters.
•Remove cover and check fuses. Figure 15.
•Replace with type 5 x 20mm, 3.15A slow blow only. (Examples are Radio Shack Cat #
10