Important Safety Instructions (continued)
Avoid fire hazard or electrical shock. Do not use an adaptor plug or extension cord or
remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.
Grounding type wall receptacle
Do not under
any circumstances
cut, remove, | / |
or bypass | |
the grounding | prong |
_.from this plug. J
Power supply cord with
CORRECT
Use this way ONLY
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia.
These mixtures can produce dangerous fumes which can cause serious injury or death.
Prevent Injury
To prevent shock hazard and assure stability during operation, the washer must be installed and electrically grounded by a qualified service person in accordance with local codes. Installation instructions are packed in the washer for installer'sreference. Referto INSTALLATIONINSTRUCTIONSfor detailed grounding procedures. If the washer ismoved to anew location, have it checked and reinstalled by a qualified service person.
To prevent personal injury or damage to the washer, the electrical power cord of the washer must be plugged into a properly grounded and polarized
Follow package directions when using laundry products. Incorrect usage can produce poisonous
Do not combine laundry products for use in 1load unlessspecified on the label. Do not mix chlorine bleach with ammonia or acids such as vinegar.
To prevent serious personal injury and damage to the washer:
All repairs and servicing must be performed by an authorized servicer unless specifically recommended in this Owner's Guide. Use only authorized factory parts.
Do not tamper with controls.
Do not install or store the washer where it will be exposed to the weather.
ALWAYS disconnect the washer from the electrical supply before attempting any service or cleaning. Failure to do so can result in electrical shock or injury.
To prevent injury, do not reach into the washer while parts are moving. Before loading, unloading or adding items, push inthe cycle selector knob and allow the tub to coast to a complete stop before reaching inside.
[] Failure to comply with these warnings could result in serious personal injuries.
[] Thiswasher isequipped with an electrical overload protector. The motor will stop if it becomes overheated. The washer will automatically restart after a cool down
period of up to 30 minutes, if the washer has not been manually turned off during this time.
SAVE THESE INSTRUCTIONS
Note: The instructions appearing in this Owner'sGuide are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.
