Using the Menus: Shooting Mode

nFACE RECOGNITION

Add portrait subjects to the face recognition da- tabase. These subjects will be given priority during Intelligent Face Detection, and their names and other information can be viewed during playback (P53).

IFLASH[±0]

Adjust flash brightness. Choose from values between +2/3 EV and 2/3EV. The default setting is ±0. Note that the desired results may not be achieved depending on shooting conditions and the distance to the subject.

gEXTERNAL FLASH

[OFF]

Choose ON when using an optional flash unit (ex- cept Fujifilm products) mounted on the camera hot shoe.

c

The flash may not fully light the subject at speeds faster than 1/1000 s.Use auto or custom white balance (P49).

If the built-in flash is raised when ON is selected for gEXTERNAL FLASH, the built-in flash will fire once to provide a signal for the optional flash unit to fire.

External flash units can be used in P, S, A, M or EXR (Sand Tonly) modes.Fujifilm external flash units do not require this set- ting.

a

The camera can be used with flash units that provide aperture adjustment, external metering, and sensitiv- ity control. Some flash units that are designed spe- cifically for other cameras can not be used.

For information on Fujifilm external flash units, see Accessories from FUJIFILM (P107).

KCUSTOM SET

Save settings for P, S, A, M and all EXR modes except R(P27).

Menus

87