51
4
1
➀Use the “ab” button to select “FRAME SET/
RESET”.
➁Press the “MENU/OK” button.
●
!
To exit the menu, use the “d” or “c” button to select
“[BACK” and then press the “MENU/OK” button.
●
!
Up to 99 prints can be specified for each frame, and
the maximum number of frames for which prints can
be specified on one SmartMedia is 999.
●
!
“TOTAL” shows the total number of prints specified.
2
Use “d” or “c” to select the frame to be specified.
➀ ➁
SDPOF FRAME SET/RESET
PLAYBACK MENU
50
2
This function allows you to select whether or not
the date of shooting is included on the print.
➀Set the Mode dial to “D”.
➁Press the “MENU/OK” button to display the
menu on the LCD monitor.
➂Press “dc” button to select “DPOF”.
➀Use the “ab” button to select “DATE”.
➁Press“d”or “c”button to specify “DATE ON”
or“DATE OFF ”. This setting is then valid for
all the prints until the setting is changed.
●
!
Before specifying any other settings, first specify
whether date is to be shown or not.
●
!
If you switch the camera off after selecting “DATE
ON”, the setting reverts to “DATE OFF”.
1➀ ➁
➂
➀ ➁
SDPOF DATE SETTING
PLAYBACK MENU
●
!
To exit the menu, use the “d” or “c” button to select
“[BACK” and then press the “MENU/OK” button.