2
3
7170
Switch the Frame NO. Memory function off and
use a formatted SmartMedia to take the picture.
Explanation
The frame number has reached 999-
9999.
There is a strong likelihood of camera
shake because the shutter speed is slow.
A protected frame was erased.
You attempted to erase a frame with
DPOF settings.
Prints were specified for more than 1000
frames in the DPOF frame settings.
Set the flash to Forced Flash mode or use a
tripod.
Remove the protection.
Reset the DPOF settings.
The maximum number of frames for which prints
can be specified on the same SmartMedia is 999.
Warning Displayed Remedy
The DPOF file contains an error.
Alternatively, the DPOF file was set up
on a different device.
Press the MENU/EXE button to create a new
DPOF file and specify all the DPOF settings
again.
Outside the AE continuous range. The shot can be taken, but the exposure will not
be correct.
AE
Warning Displayed Explanation Remedy
The camera batteries are low on charge.
No SmartMedia is loaded, or it is loaded
incorrectly.
The SmartMedia is not formatted.
• The SmartMedia contact area are soild.
• The SmartMedia is damaged.
•
The SmartMedia format is incorrect.
The SmartMedia is fully recorded.
The SmartMedia is write-protected.
• An attempt was made to playback
incorrectly recorded data.
• An attempt was made to playback a
frame not recorded on camera.
Replace or recharge the batteries.
Load a SmartMedia or reload the SmartMedia
the correct way round.
Format the SmartMedia.
Wipe the contact area on the SmartMedia with a
soft dry cloth. It may be necessary to format the
SmartMedia. If the error message is still
displayed, replace the SmartMedia.
Use a SmartMedia that is not write-protected.
Images cannot be played back.
Erase some images or use a SmartMedia that
has ample free space.
Warning Displays eThe table below lists the warnings that are displayed on the LCD monitor.
1
7
8