FujiFilm 16082969, 3D W3 Printing Pictures via USB (DOnly)

Printing Pictures via USB (DOnly)

If the printer supports PictBridge, the camera can be connected directly to the printer and pictures can be printed without first being copied to a computer. Note that depending on the printer, not all the functions described below may be supported.

Printing in C

Cpictures in MPO format can not be printed via direct USB connection, although JPEG copies created when MPO+JPEG is selected for o3DREC can be printed in D(pg. 85). For information on Cprints, visit http:// fujifilm.com/3d/print/.

Connecting the Camera

1 Connect the supplied USB cable as shown and	2 Press the abutton for about a second to turn
turn the printer on.	the camera on. tUSB will be displayed in
	the monitor, followed by the PictBridge display
	shown below at right.
	USB	PICTBRIDGE
		TOTAL: 00000
		00 SHEETS
		FRAME
		OK SET

1Notes

•Print pictures from internal memory or a memory card that has been formatted in the camera.

•Default printer page size and print quality settings are used when printing via direct USB connection.

Connections

49