119118

Explanation

Warning Displayed Remedy

LCD Monitor
Camera malfunction or fault. Switch the camera on again, taking care
not to touch the lens.
Turn the camera off and on again a few
times.
Prints were specified for more
than 1000 frames in the DPOF
frame settings.
The maximum number of frames for which
prints can be specified on the same
SmartMedia is 999.
display
panel
Lens cover fault. Switch the camera off and on again, taking
care not to touch the lens.
Switch the camera then on, taking a few
times.
The DPOF file contains an error.
Alternatively, the DPOF file was
set up on a different device.
Press the MENU/OK button to create a new
DPOF file and specify all the DPOF settings
again.
There is a strong likelihood of
camera shake because the
shutter speed is slow.
A protected frame was erased.
The AF (auto focus) cannot work
effectively.
There is a print order specified for
image you attempted to erase.
Remove the protection.
If the image is too dark, take the picture at
a distance of around 2 m (6.6 ft.) from the
subject.
Use AF lock to take the picture.
When you erase the image, the DPOF
settings for that image are deleted at the
same time.
Use flash photography. However, a tripod
should be used for some scenes and modes.
The data could not be recorded
due to a SmartMedia error or a
connection error between the
SmartMedia and camera.
The photographed image cannot
be recorded as it is too large to
fit in the available space on the
SmartMedia.
Re-insert the SmartMedia or switch the
camera off and then on again.
Use a new SmartMedia.
Warning Displays

Warning Displayed Explanation Remedy

The voice memo file is faulty. The voice memo cannot be played back.
LCD Monitor
display
panel
––
––
––
––
––
––
The frame number has reached
9999999.
Switch the Frame No. Memory function off and
use a formatted SmartMedia to take the picture.
Outside the AE continuous range. The shot can be taken, but the exposure will
not be correct.
––