FujiFilm 7129032, S800 Macintosh, Windows 98 SE / Me / 2000 Professional

Connecting to a PC

CAUTION	DSet a PC.
• FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix	Windows 98 SE / Me / 2000 Professional /
S800 is compatible with PTP (Picture Transfer	Macintosh
Protocol)/MTP (Media Transfer Protocol). A PTP/MTP-
compatible camera is a camera which can recognize	CAUTION
the PC and printer automatically when connected.
• Always use the FUJIFILM AC Power Adapter AC-5VX	The Windows CD-ROM may also be required during
(sold separately). If the camera suddenly loses power
	installation. In this event, change CD-ROMs as directed
during data exchange, the Memory Card or internal
	by the on-screen instructions.
memory could be damaged.
• Do not disconnect the USB cable when the camera is	• FinePixViewer automatically starts up and the Save
communicating with a PC. If disconnecting the USB
	Image Wizard window (Save Image dialog box)
cable during communication, the files on the Memory
	appears. Follow the instructions provided on screen to
Card or internal memory may cause damage.
	save the images. To proceed without saving the
• In Mac OS X, you must set the automatic setup when
	images, click the [Cancel] button.
the first time you connect the camera to your PC.
• Make sure that USB cable is connected correctly and
pushed in.
• Perform pre-arranged steps to disconnect and turn off
the camera (➝p.137-138).
• When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect
the camera from the PC. See p.137, 138 for information
on the disconnection procedure.
• The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable, always check that the
indicator lamp is off.	* Screen for Windows 2000 Professional
• Always use FinePixViewer to transfer images with voice
memos to a PC.
• When Windows 98 SE is used, the supplied software	MEMO
must be installed first before connecting the camera to
	• You can only see images saved on a PC. Save images
a PC using the USB cable. The PC will not recognize
the camera if it is connected before the installation.	on a PC.
	• If you cancel saving by clicking the [Cancel] button, set
	the Power switch to OFF to turn off the camera and then
	disconnect it from the PC.

136